| 不同脱氧条件下弹簧钢氧化物夹杂的性质和形貌 |
| |
| 引用本文： | 薛正良,李正邦,张家雯,杨武.不同脱氧条件下弹簧钢氧化物夹杂的性质和形貌[J].特殊钢,2001,22(3):24-26. |
| |
| 作者姓名： | 薛正良 李正邦 张家雯 杨武 |
| |
| 作者单位： | 1. 钢铁研究总院,
2. 江苏淮钢集团 |
| |
| 基金项目： | 本研究课题为国家自然科学基金资助项目，批准号为59874023 |
| |
| 摘 要： | 用光学显微镜和扫描电镜研究了工业生产条件下用不同脱氧工艺生产的60Si2MnA弹簧钢氧化物夹杂Al2O3、SiO2和铝硅酸盐的性质、形貌和控制。
|
| 关 键 词： | 弹簧钢 脱氧工艺 氧化物夹杂 夹杂物形态控制 |
Property and Morphology of
Oxide Inclusion in Spring Steel Produced with Different Deoxidization Processes |
| |
| Xue Zhengliang,Li Zhengbang,Zhang Jiawen,Yang Wu.Property and Morphology of
Oxide Inclusion in Spring Steel Produced with Different Deoxidization Processes[J].Special Steel,2001,22(3):24-26. |
| |
| Authors: | Xue Zhengliang Li Zhengbang Zhang Jiawen Yang Wu |
| |
| Abstract: | The properties, morphology and control of oxide inclusion - Al\-2O\-3, SiO\-2 and aluminum silicate in spring steel 60Si2MnA produced with different deoxidation processes of commercial production were studied by optical microscope (OM) and scanning electron microscope (SEM). |
| |
| Keywords: | Spring steel Deoxidization Process Oxide Inclusion Inclusion Morphology Control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
