首页 | 本学科首页   官方微博 | 高级检索  
     

基于特性方程的燃气涡轮的建模与性能仿真
引用本文:李防战,孟光,王廷兴,Jay Fletch. 基于特性方程的燃气涡轮的建模与性能仿真[J]. 动力工程, 2005, 25(1): 18-21,31
作者姓名:李防战  孟光  王廷兴  Jay Fletch
作者单位:1. 上海交通大学振动、冲击、噪声国家重点实验室,上海,200030
2. 上海岱美汽车饰件有限公司,上海,201203
3. 美国联合技术研究中心
基金项目:国家高技术研究发展计划(863计划);美国UTRC国际合作项目
摘    要:基于特性方程建立了一种能够达到设计精度要求的快速简单的涡轮数学模型,用Modelica语言和Dymola编译器实现了涡轮的建模和性能仿真。通过一个发动机系统级模型的仿真实验,验证了涡轮模型的有效性。结果表明;采用建立的性能仿真数学模型能够模拟涡轮性能,并能够实现非设计转速小流量工况下的性能仿真;建立的涡轮级模块具有典型性、独立性、通用性和可连接性,能够满足快速搭建航空动力系统的系统级动态模型的需要。图6参6

关 键 词:动力机械工程  燃气涡轮  数学模型  建模  仿真
文章编号:1000-6761(2005)01-0018-04

Modeling and Performance Simulation of Gas Turbines Based on Their Characteristic Equations
Jay Fletch. Modeling and Performance Simulation of Gas Turbines Based on Their Characteristic Equations[J]. Power Engineering, 2005, 25(1): 18-21,31
Authors:Jay Fletch
Abstract:A rapid and simple mathematical model for turbines, which is based on the characteristic equations and is able to attain design precision, has been developed. The computer language Modelica and the editor Dymola were used for programming the models and also for simulating turbine performance. By a model simulation of an engine on system's level the effectiveness of the turbine model was verified. Results manifest that the formulated mathematical model can properly simulate turbine performance even in off-design modes of operation and at reduced flow. The composed turbine stage modules are distinguished by their typicality their independence, generality and link-up ability. They can meet the requirement for rapidly establishing dynamic models of aircraft power systems. Figs6 and refs 6
Keywords:power and mechanical engineering  gas turbine  mathematical model  modeling  simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号