首页 | 本学科首页   官方微博 | 高级检索  
     

5-PSS/UPU并联机构的多目标性能参数优化
引用本文:李研彪,郑航,徐梦茹,罗怡沁,孙鹏. 5-PSS/UPU并联机构的多目标性能参数优化[J]. 浙江大学学报(工学版), 2019, 53(4): 654-663. DOI: 10.3785/j.issn.1008-973X.2019.04.006
作者姓名:李研彪  郑航  徐梦茹  罗怡沁  孙鹏
作者单位:浙江工业大学 机械工程学院,浙江 杭州 310032
摘    要:在并联机构多目标参数优化方面,针对5-PSS/UPU并联机构,提出基于空间模型技术与主成分分析法相结合的多目标性能参数优化方法. 推导出机构的位置反解、运动传递平衡方程,对单个驱动分支进行螺旋分析,给出多个全域性能指标;应用空间模型技术,研究各全域性能评价指标与机构结构参数之间的分布规律,绘制了各项全域性能图谱;应用主成分分析(PCA)法,研究各全域性能指标之间的相关性,得到综合性能评价指标函数并绘制综合性能图谱;基于综合性能图谱,选取多组结构参数并计算综合性能指标在机构工作空间下的分布规律.研究结果表明,空间模型技术结合PCA法能够综合考虑机构的各项性能,对结构参数进行优化设计,该优化方法同样适用于其他并联机构.

关 键 词:并联机构  运动学分析  性能指标  主成分分析(PCA)  

Multi-target parameters of performance optimization for 5-PSS/UPU parallel mechanism
Yan-biao LI,Hang ZHENG,Meng-ru XU,Yi-qin LUO,Peng SUN. Multi-target parameters of performance optimization for 5-PSS/UPU parallel mechanism[J]. Journal of Zhejiang University(Engineering Science), 2019, 53(4): 654-663. DOI: 10.3785/j.issn.1008-973X.2019.04.006
Authors:Yan-biao LI  Hang ZHENG  Meng-ru XU  Yi-qin LUO  Peng SUN
Abstract:The multi-target parameters of performance optimization for the 5-PSS/UPU parallel mechanism were optimized by using the principal component analysis (PCA) method and space models in aspect of comprehensively considering the multi-objective parallel mechanism performance. Several performance evaluation indices were proposed and discussed according to the inverse position equations, kinematics transmission equations and screw theory analysis of this five-DOF parallel mechanism. Then the spatial model technology was used to reveal the relationship of each performance evaluation indexes and structure parameters of this 5-PSS/UPU parallel mechanism. The multi-dimensional performance indicators were effectively integrated by reducing redundant data based on PCA, and the comprehensive performance optimization and design space were obtained. Multiple sets of structural parameters were selected based on comprehensive design space, and the distribution of performance indicators in the working space of the 5-PSS/UPU parallel mechanism was calculated. Results show that the method of PCA and space models can optimize the sizes of the mechanism considering all of mechanism performances. The optimization method is also suitable for other parallel mechanisms.
Keywords:parallel manipulator  kinematics analysis  performance indicator  principal component analysis (PCA)  
本文献已被 CNKI 等数据库收录!
点击此处可从《浙江大学学报(工学版)》浏览原始摘要信息
点击此处可从《浙江大学学报(工学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号