| 基于三坐标测量机的螺旋锥齿轮加工参数反调修正 |
| |
| 引用本文： | 唐进元,邢彬.基于三坐标测量机的螺旋锥齿轮加工参数反调修正[J].北京工业大学学报,2010,36(11). |
| |
| 作者姓名： | 唐进元 邢彬 |
| |
| 作者单位： | 中南大学,机电工程学院,现代复杂装备设计与极端制造教育部重点实验室,长沙,410083;沈阳发动机设计研究所,沈阳,110015 |
| |
| 基金项目： | 国家“九七三”计划资助项目(2005CB724100); 国家自然科学基金资助项目(50875263) |
| |
| 摘 要： | 研究了基于三坐标测量机的螺旋锥齿轮加工参数反调修正技术与方法.根据啮合原理建立了螺旋锥齿轮理想齿面方程;进行测量网格划分规划,提出真实齿面在法线方向上的偏差计算方法;采用序列二次规划法求得机床调整参数变化量与齿面法向误差的最优解.在通用型三坐标测量机上进行螺旋锥齿轮实际齿面测量,并计算加工参数反调修正量.结果表明,基于三坐标测量机的螺旋锥齿轮加工参数反调修正技术与方法正确可行.
|
| 关 键 词： | 螺旋锥齿轮 齿面测量 序列二次规划法 参数反调 |
Machine-settings Correction of Spiral Bevel Gear Based on Coordinate Measuring Machine |
| |
| TANG Jin-yuan,XING Bin.Machine-settings Correction of Spiral Bevel Gear Based on Coordinate Measuring Machine[J].Journal of Beijing Polytechnic University,2010,36(11). |
| |
| Authors: | TANG Jin-yuan XING Bin |
| |
| Affiliation: | TANG Jin-yuan1,XING Bin2(1.Key Laboratory of Modern Complex Equipment Design , Extreme Manufacturing,Ministry of Education,School of Mechanical , Electrical Engineering,Central South University,Changsha 410083,China,2.Shenyang Aeroengine Research Institute,Shenyang 110015,China) |
| |
| Abstract: | The research on the machine-settings correction of spiral bevel gears used on the coordinate measuring machine is described.According to the basic tooth principle of spiral bevel gears,the theoretical equation of tooth surface is established,and the measuring grid is programmed.The calculating method of the errors of the real tooth surface on the normal direction is brought forward.The Sequential Quadratic Programming method is advanced to solve the overdetermined set of the machine tool regulation paramete... |
| |
| Keywords: | spiral bevel gear tooth surface measurement sequential quadratic programming method machine-settings correction |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
