Abstract: | AbstractPowder mixtures composed of liquid forming master alloy powder and coarse iron powder were sintered to near full density by having a high amount (20 wt-%) of liquid phase during sintering. This was made possible by the use of the Fe-P-C system with or without Cu. Without post-sintering treatment, a brittle microstructure was obtained. By means of altered C and P control and decarburisation heat treatment of the as sintered material, the final non-brittle microstructure was achieved. Using the open porosity and liquid phase as a diffusion path, rapid decarburisation is created and the local combination of carbon and phosphorus in the microstructure is avoided. In this way, iron phosphide is not formed on grain and/or particle boundaries. Presence of pores is confirmed to be beneficial for grain growth control. |