The microstructures and mechanical properties of cast Mg–Zn–Al–RE alloys |
| |
Authors: | Wenlong Xiao Shusheng Jia Lidong Wang Yaoming Wu Limin Wang |
| |
Affiliation: | aKey Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering, Jilin University, Changchun 130025, China;bState Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, CAS, Changchun 130022, China |
| |
Abstract: | The microstructures and mechanical properties of cast Mg–Zn–Al–RE alloys with 4 wt.% RE and variable Zn and Al contents were investigated. The results show that the alloys mainly consist of α-Mg, Al2REZn2, Al4RE and τ-Mg32(Al,Zn)49 phases, and a little amount of the β-Mg17Al12 phase will also be formed with certain Zn and Al contents. When increasing the Zn or Al content, the distribution of the Al2REZn2 and Al4RE phases will be changed from cluster to dispersed, and the content of τ-Mg32(Al,Zn)49 phase increased gradually. The distribution of the Al2REZn2 and Al4RE phases, and the content of β- or τ-phase are critical to the mechanical properties of Mg–Zn–Al–RE alloys. The Mg–6Zn–5Al–4RE alloy with cluster Al2REZn2 phase and low content of β-phase, exhibits the optimal mechanical properties, and the ultimate tensile strength, yield strength and elongation are 242 MPa, 140 MPa and 6.4% at room temperature, respectively. |
| |
Keywords: | Mg– Zn– Al– RE alloys Microstructures Phase transformation Mechanical properties Strengthening |
本文献已被 ScienceDirect 等数据库收录! |
|