| 铝合金薄壁件数控铣削加工变形试验与分析 |
| |
| 引用本文： | 曹岩,白瑀,何永强,李云龙. 铝合金薄壁件数控铣削加工变形试验与分析[J]. 制造技术与机床, 2010, 0(5) |
| |
| 作者姓名： | 曹岩 白瑀 何永强 李云龙 |
| |
| 作者单位： | 1. 西安工业大学机电工程学院,陕西,西安,710032
2. 西安交通大学机械工程学院,陕西,西安,710049 |
| |
| 基金项目： | 陕西省教育厅专项基金，西安工业大学校长科研基金 |
| |
| 摘 要： | 薄壁工件刚度差,在数控加工过程中在切削力的作用下极易产生加工变形,影响工件加工精度和成本。在THA5656立式加工中心上对铝合金材料LY12CZ方形直侧壁工件变形进行了试验研究,并进行误差分析。通过正交试验,研究薄壁件在铣削精加工过程中各个切削用量情况下工件的变形情况,为提高生产率和进一步控制加工变形和验证加工过程计算机仿真模型提供依据。
|
| 关 键 词： | 薄壁件 数控铣削 加工变形 正交试验 误差分析 |
Experiment and Analysis on NC Milling Deformation of Aluminum Alloy Thin-walled Components |
| |
| CAO Yan,BAI Yu,HE Yongqiang,LI Yunlong. Experiment and Analysis on NC Milling Deformation of Aluminum Alloy Thin-walled Components[J]. Manufacturing Technology & Machine Tool, 2010, 0(5) |
| |
| Authors: | CAO Yan BAI Yu HE Yongqiang LI Yunlong |
| |
| Affiliation: | CAO Yan,BAI Yu,HE Yongqiang,LI Yunlong (School of Electromechanical Engineering,Xi'an Technological University,Xi'an 710032,CHN,School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,CHN) |
| |
| Abstract: | Because of their poor rigidity,the deformation of thin-walled workpieces caused by cutting force in NC milling is a main factor that decreases the machining precision and increases aeronautical product cost.The straight side walls of aluminum LY12CZ workpieces are machined on a vertical machining center THA5656 and their errors are analyzed.Based on orthogonal tests,the deformation characters of the thin-walled workpieces are discussed under different cutting conditions.The research can provide support for ... |
| |
| Keywords: | Thin-walled Component NC Milling Machining Deformation Orthogonal Test Error Analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
