首页 | 本学科首页   官方微博 | 高级检索  
     

包覆锰锌铁氧体的FeSiAl磁粉及其磁粉芯性能
引用本文:刘胜隆,何玉定,杨元政,谢致薇,陈先朝. 包覆锰锌铁氧体的FeSiAl磁粉及其磁粉芯性能[J]. 磁性材料及器件, 2016, 0(4). DOI: 10.3969/j.issn.1001-3830.2016.04.011
作者姓名:刘胜隆  何玉定  杨元政  谢致薇  陈先朝
作者单位:广东工业大学材料与能源学院,广东广州,510006
摘    要:用化学共沉淀法在扁平化的FeSiAl粉末表面包覆不同含量的Mn-Zn铁氧体,经冷压成型制备磁粉芯,在660℃氮气保护下退火1h。用XRD分析粉末的相结构,用振动样品磁强计测试粉末的磁性能,用动态磁滞回线测试装置测试磁粉芯的功率损耗。研究结果表明,随着铁氧体包覆量的增加,铁硅铝磁粉饱和磁化强度下降,磁粉芯损耗降低。在100k Hz/300m T测试条件下,包覆量为6%时制备的FeSiAl磁粉芯的损耗降为46.5W/kg。继续提高铁氧体的包覆量,损耗变化不明显。

关 键 词:FeSiAl合金粉末  Mn-Zn铁氧体包覆  磁粉芯  功率损耗

Properties of the FeSiAl magnetic powder coated with MnZn ferrite and its cores
LIU Sheng-long,HEYu-ding,YANG Yuan-zheng,XIE Zhi-wei,CHEN Xian-chao. Properties of the FeSiAl magnetic powder coated with MnZn ferrite and its cores[J]. Journal of Magnetic Materials and Devices, 2016, 0(4). DOI: 10.3969/j.issn.1001-3830.2016.04.011
Authors:LIU Sheng-long  HEYu-ding  YANG Yuan-zheng  XIE Zhi-wei  CHEN Xian-chao
Abstract:Mn-Zn ferrite prepared by chemical coprecipitation method was coated on the surface of FeSiAl powder,and the FeSiAl magnetic powder core was prepared by cold pressing,followed by annealing at 660℃ for 1h. XRD was used to analyze powder phase structure,vibrating sample magnetometer (VSM) was used to test the magnetic properties of the powders,and dynamic hysteresis loop measurement system to test their power loss. The results show that both the saturation magnetization and power loss of the ferrite coated FeSiAl powder decrease with increasing the amount of ferrite coating. For coating weight of 6%,the power loss of the magnetic core decreases to 46.5 W/kg at the 100kHz/300mT test condition. The variation of the loss is not obvious with further increasing the amount of ferrite coating.
Keywords:FeSiAl alloy powder  Mn-Zn ferrite coating  magnetic powder core  power loss
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号