首页 | 本学科首页   官方微博 | 高级检索  
     

聚四氟乙烯涂层在高载荷条件下的摩擦学性能研究
引用本文:侯根良,乔小平,苏勋家,王延斌,梅振兴,徐可为. 聚四氟乙烯涂层在高载荷条件下的摩擦学性能研究[J]. 润滑与密封, 2007, 32(6): 84-86
作者姓名:侯根良  乔小平  苏勋家  王延斌  梅振兴  徐可为
作者单位:第二炮兵工程学院,陕西西安,710025;西安交通大学金属材料强度国家实验室,陕西西安,710049;第二炮兵工程学院,陕西西安,710025;西安交通大学金属材料强度国家实验室,陕西西安,710049
摘    要:制备了以45#钢为基体的聚四氟乙烯(PTFE)涂层,利用自制的高载荷条件下摩擦因数测试装置研究了PTFE涂层的摩擦学性能,结果表明:PTFE涂层在4~90MPa范围内具有优良的减摩性能,最低摩擦因数为0.032。正压力与摩擦因数服从负指数衰减模型(Fit Exponential Decay),随着载荷的增加,静摩擦因数和滑动摩擦因数先迅速降低,然后趋于定值。

关 键 词:聚四氟乙烯  涂层  高载荷  摩擦因数  拟合
文章编号:0254-0150(2007)6-084-3
修稿时间:2007-01-05

Study on Friction Behavior for PTFE Coatings under Overload Conditions
Hou Genliang,Qiao Xiaoping,Su Xunjia,Wang Yanbin,Mei Zhenxing,Xu Kewei. Study on Friction Behavior for PTFE Coatings under Overload Conditions[J]. Lubrication Engineering, 2007, 32(6): 84-86
Authors:Hou Genliang  Qiao Xiaoping  Su Xunjia  Wang Yanbin  Mei Zhenxing  Xu Kewei
Abstract:PTFE coatings were sprayed on 45 carbon steel.In order to investigate the friction behavior of the PTFE coating in overloading conditions,the self-designed friction tester was employed to test the static and slippage friction coefficient.The experimental results show that with the contact pressure range from 4 to 90 MPa,the PTFE coatings have excellent friction-reduction capacity, the lowest friction coefficient is 0.032.The experimental data were fitted,the fitting results show that the pressure and the friction coefficient are consistent with the exponential decay,as the contact pressure increase, the static friction coefficient and slippage friction coefficient decrease quickly at first,then they become stable.
Keywords:PTFE    coatings    overload    friction coefficient    fit
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号