|
|||||
|
|
| 直线边墙窄缝挑坎的水力计算 | |
| 引用本文： | 韩守都,刘韩生,倪汉根. 直线边墙窄缝挑坎的水力计算[J]. 水利水电科技进展, 2012, 32(2): 54-56 |
| 作者姓名： | 韩守都 刘韩生 倪汉根 |
| 作者单位： | 1. 新疆水利水电勘测设计研究院,新疆乌鲁木齐,830000 2. 水利部西北水利科学研究所,陕西杨凌,712100 3. 大连理工大学建设工程学部,辽宁大连,116024 |
| 摘 要： | 应用辐射水流特性计算窄缝挑坎中线水面线,提出一级直线窄缝挑坎水力计算方法,可以比较简单地计算水面线和水舌挑距。水力模型试验验证结果表明,计算结果与试验值基本吻合;同样来流宽深比情况下,水面线与来流弗劳德数基本无关。 |
| 关 键 词： | 窄缝挑坎 水面线 水舌挑距 水力计算 模型试验 |
| 修稿时间： | 2012-04-19 |
Hydraulic calculation of slit-type flip bucket with straight line sidewalls |
|
| HAN Shou-du , LIU Han-shong , NI Han-gen. Hydraulic calculation of slit-type flip bucket with straight line sidewalls[J]. Advances in Science and Technology of Water Resources, 2012, 32(2): 54-56 | |
| Authors: | HAN Shou-du LIU Han-shong NI Han-gen |
| Affiliation: | 1.Xinjiang Water Conservancy and Electricity Survey and Designing Institute,Urumqi 83000,China;2.Northwest Hydrotechnical Research Institute,MWR,Yangling 712100,China;3.Faculty of Infrastructure Engineering,Dalian University of Technology,Dalian 116024,China) |
| Abstract: | Based on the study of radial contraction flow,a theoretical calculation method of calculating hydraulic characteristics for general slit-type flip bucket with straight line sidewalls is established.Appling this new method,the water surface line and horizontal length of jet flow could be calculated easily.The validity of the method is verified by hydraulic model tests,which shows that the calculation results are basically identical with the results of hydraulic model tests.It also can be concluded that the water surface line almost have nothing to do with Froude Number when the width to depth ratio of the flow is same. |
| Keywords: | slit-type bucket water surface line horizontal length of jet flow hydraulic calculation model test |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《水利水电科技进展》浏览原始摘要信息 | |
| 点击此处可从《水利水电科技进展》下载免费的PDF全文 | |