| 硅铝铁合金脱氧工艺技术分析 |
| |
| 引用本文： | 储少军,牛强,成国光.硅铝铁合金脱氧工艺技术分析[J].铁合金,2000,31(1):1-4. |
| |
| 作者姓名： | 储少军 牛强 成国光 |
| |
| 作者单位： | 北京科技大学冶金学院,北京,100083 |
| |
| 摘 要： | 通过Ｓｉ－Ａｏ－Ｏ体系的热力学分析计算，认为国内钢厂采用ＳｉＡｌＦｅ进行终脱氧的效果并非由于Ｓｉ、Ａｌ复合脱氧的作用，而是该合金物理性能的原因，并根据普碳钢生产工艺条件对合金成分设计提出了建议。
|
| 关 键 词： | 硅铝铁合金 脱氧 热力学 炼钢 |
| 修稿时间： | 1999-10-29 |
TECHNICAL ANALYSES OF DEOXIDATION PROCESS OF FERROSILICO-ALUMINIUM SMELTING |
| |
| Chu Shaojun,Niu Qiang,Cheng Guoguang.TECHNICAL ANALYSES OF DEOXIDATION PROCESS OF FERROSILICO-ALUMINIUM SMELTING[J].Ferro-alloys,2000,31(1):1-4. |
| |
| Authors: | Chu Shaojun Niu Qiang Cheng Guoguang |
| |
| Abstract: | Through Thermodynamic analysis and calculation of Si Al O System,the paper considers that the result of final deoxidation with SiAlFe alloy in demestic steel plants is not produced by complex deoxidation of Si and Al,but is because of the alloy physical property.It also puts forward the proposal on alloy composition according with process condition of producing plain carbon structural steel. |
| |
| Keywords: | Ferrosilico aluminium deoxidation thermodynamics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
