掺杂Pb氧化物的MnO2电极材料制备与性能 |
| |
引用本文: | 吴以鹏,张启卫,罗菊香,崔国星.掺杂Pb氧化物的MnO2电极材料制备与性能[J].丹东纺专学报,2011(4):269-272. |
| |
作者姓名: | 吴以鹏 张启卫 罗菊香 崔国星 |
| |
作者单位: | 三明学院化学与生物工程学院,福建三明365004 |
| |
基金项目: | 福建省高校服务海西重点项目(HX200803);福建省大学生创新性实验计划项目(2007) |
| |
摘 要: | 以Mn(NO3)2、Pb(NO3)2为原料,在碱性条件下用NaCIO作氧化剂,制备掺杂Pb氧化物的MnO2电极材料。试验比较了碱和氧化剂用量、反应时间、反应温度等因素对产物电化学性能的影响。用恒电流充放电系统测试了样品的充放电容量和循环性能。结果表明:在40qC和强碱条件下,Mn(NO3)2、Pb(NO3)2与NaCIO反应4h,制得掺杂Pb氧化物的MnO2试样。经恒电流充放电性能测试,产物的充放电容量达到200mAh·g^-1,且试样的循环性能也有一定改善。
|
关 键 词: | Pb氧化物掺杂 MnO2制备 电化学性能 |
Preparation and Performance of Electrode Material Formed by MnO2 Dopped with Pb Oxide |
| |
Affiliation: | WU Yi - peng, ZHANG Qi - wei, LUO Ju - xiang, CUI Guo - xing ( College of Chemistry and Biology Engineering, Sanming University, Sanming 365004, China) |
| |
Abstract: | Electrode material ofMnO2 dopped with PbO2 was prepared with Mn (NO3 )2 and Pb (NO3)2 as raw material with NaCIO as the oxidant under alkaline condition. The effects of the amount of alkali and oxidant, reaction time and reaction temperature on the electrochemical performance of the product were compared. The sampies' charge - discharge capacity and cycle performance were tested by the system of constant current charge - discharge. MnO2 -dopped with PbO2 was obtained when the reaction temperature was 40℃, Mn ( NO3 )2 reacted with Pb (NO3 )2 and NaCIO under the strong alkali condition after 4 hours. The result showed that the product' s charge -discharge capacity achieved 200 mAh ·g-1 and its cycle performance had certainly improved, through the test by the system of constant current charge - discharge. |
| |
Keywords: | doped with Pb oxide MnO2 production electrochemical performance |
本文献已被 维普 等数据库收录! |
|