首页 | 本学科首页   官方微博 | 高级检索  
     

全位置相贯线自动焊接新型焊枪设计
引用本文:李东洁,李潜,王世伟,尤波. 全位置相贯线自动焊接新型焊枪设计[J]. 焊接学报, 2018, 39(3): 117-119,123. DOI: 10.12073/j.hjxb.2018390081
作者姓名:李东洁  李 潜  王世伟  尤 波
作者单位:哈尔滨理工大学机电控制及自动化技术研究所;
摘    要:在焊接复杂的空间曲线或进行全位置焊接操作时,传统焊接机器人关节耦合、系统干涉现象较为普遍,焊接局限性明显. 为了克服焊枪位姿改变时的干涉现象,基于各位置焊缝角度和深度均动态变化的特征,设计出一款能调节自身工作角的新型焊枪,使焊枪自身能够具有一定的实时调节能力,在自动焊接过程中通过调节焊枪工作角配合机器人完成全位置焊接,增强机器人的实用性和可行性,满足较为复杂相贯曲线的焊接要求,使用OpenGL对焊枪运动学模型和焊接过程进行了仿真,仿真结果证明了所设计的自动焊接焊枪的有效性.

关 键 词:全位置  自动焊接  相贯线  机器人
收稿时间:2016-09-27

Design of new welding torch for automatic welding of all position intersecting line
LI Dongjie, LI Qian, WANG Shiwei, YOU Bo. Design of new welding torch for automatic welding of all position intersecting line[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(3): 117-119,123. DOI: 10.12073/j.hjxb.2018390081
Authors:LI Dongjie  LI Qian  WANG Shiwei  YOU Bo
Abstract:The joint coupling and system interference of the traditional welding robot are common in complex intersecting line welding and all position welding, resulting in obvious welding limitation. To overcome the system interference generated by the position adjustment of welding torch, a new type of welding torch which can adjust the working angle is designed on the basis of the dynamic variation of the welding angle and depth at different positions. The torch presents a certain real-time adjustment capability. In the process of automatic welding, the all position welding can be completed by adjusting the working angle of the welding torch with the robot, to enhance the practicability and feasibility of the robot and meet the welding request with complex intersection curve. The kinematics model and welding process of welding torch were simulated by OpenGL. The simulation results prove the validity of the designed automatic welding torch.
Keywords:all position   automatic welding   intersecting line   robot
本文献已被 CNKI 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号