冶金工业的变频器应用与维护 装矿站变频器的过流故障处理 |
| |
引用本文: | 李方园. 冶金工业的变频器应用与维护 装矿站变频器的过流故障处理[J]. 自动化博览, 2010, 27(11): 44-46 |
| |
作者姓名: | 李方园 |
| |
作者单位: | 浙江工商职业技术学院 |
| |
摘 要: | 电振电机在生产过程采用变频器控制时经常跳闸,变频器故障显示为电流过大,同时轴承变黑,且无法正常使用。通过检查变频器本身、负载以及参数后,均未出现任何问题,后查明是轴电流引起。在安装滤波器后轴承电流减少到可以忽略的水平,电机的使用寿命得以大大提高,且最终解决了变频器过流问题。
|
关 键 词: | 变频器 过流 故障排除 |
The AC inverter's application and maintenance in the metallurgical industry |
| |
Abstract: | The vibration motor with AC inverter always triped in the production process control with the inverter fault of overcurrent.At the same time the bearing became black and can not work properly. By examining the inverter itself, as well as the parameters of the load, there were none problems. Finally the real reason is bearing current. After the installation of filters, the bearing current can be reduced to negligible levels, and the service life of motor can be greatly en- hanced. Also the overcurrent fault ... |
| |
Keywords: | AC inverter Overcurrent Trouble shooting |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|