| 复合材料RTM模具的制备 |
| |
| 引用本文： | 王海文,范建礼.复合材料RTM模具的制备[J].工程塑料应用,2006,34(5):40-41. |
| |
| 作者姓名： | 王海文 范建礼 |
| |
| 作者单位： | 1. 中国石油大学(华东)石油工程学院,东营,257062
2. 胜利石油管理局井下作业二公司,东营,257000 |
| |
| 摘 要： | 根据树脂传递模塑(RTM)模具对基体树脂的基本要求,选用双酚A环氧乙烯基酯树脂为基体,聚乙酸乙烯酯为低收缩添加剂,玻璃纤维经编织物为增强材料,并加入相应的助剂,制备了复合材料RTM模具。该模具具有成本较低、开发周期短、精度较高等优点,但表面强度和热效率较低。
|
| 关 键 词： | 树脂传递模塑 双酚A环氧乙烯基酯树脂 低收缩添加剂 复合材料 模具 |
| 收稿时间： | 2006-03-01 |
| 修稿时间： | 2006年3月1日 |
MANUFACTURE OF RTM MOULD OF COMPOSITE |
| |
| Wang Haiwen,Fan Jianli.MANUFACTURE OF RTM MOULD OF COMPOSITE[J].Engineering Plastics Application,2006,34(5):40-41. |
| |
| Authors: | Wang Haiwen Fan Jianli |
| |
| Affiliation: | 1.Institute of Petroleum Engineering, China University of Petroleum, Dongying 257062, China; 2. Downhole Workover Service 2th Company, Shengli Petroleum Administrative Bureau, Dongying 257000, China |
| |
| Abstract: | Resin transfer molding(RTM) mould was manufactured with bisphenol-A epoxide vinylester resin as matrix,poly(vinyl acetate) as low shrinkage additive and glass fiber tricot as reinforcing material,according to the basic requirement of matrix resin of RTM mould.The mould had merits such as low cost,short development cycle and high precision,while it had defects of low surface strength and thermal efficiency. |
| |
| Keywords: | resin transfer molding bisphenol-A epoxide vinylester resin low shrinkage additive composite mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
