| 典型支架注射模设计 |
| |
| 引用本文： | 潘建新,周志雄. 典型支架注射模设计[J]. 模具工业, 2006, 32(3): 57-61 |
| |
| 作者姓名： | 潘建新 周志雄 |
| |
| 作者单位： | 湖南大学,机械与汽车工程学院,湖南,长沙,410082;湖南科技职业学院,湖南,长沙,410082;湖南大学,机械与汽车工程学院,湖南,长沙,410082 |
| |
| 摘 要： | 介绍了耳机支架模具的设计过程,采用点浇口形式,提高了产品的表面质量,采用斜滑块内、外侧抽芯及斜顶块结构,不但使模具布局合理,而且解决了出模难的问题。
|
| 关 键 词： | 注射模 耳机支架 点浇口 侧向抽芯 斜顶块 |
| 文章编号： | 1001-2168(2006)03-0057-05 |
| 收稿时间： | 2005-08-25 |
| 修稿时间： | 2005-08-25 |
Design of the Injection Mould for the Headphone Bracket |
| |
| PAN Jian-xin,ZHOU Zhi-xiong. Design of the Injection Mould for the Headphone Bracket[J]. Die & Mould Industry, 2006, 32(3): 57-61 |
| |
| Authors: | PAN Jian-xin ZHOU Zhi-xiong |
| |
| Affiliation: | 1. College of Mechanical and Automotive Engineering, Hunan University Changsha, Hunan 410082, China; 2. Hunan Professional Academy of Science and Technology, Changsha, Hunan 410082, China |
| |
| Abstract: | The design process of the injection mould for the headphone bracket was introduced. The surface quality of the product was raised with the adoption of pinpoint gate. By the use of slanted slider to do inner and outer side core pulling and the application of inclined ejecting block structure, the layout of the mould was more reasonable and the problem of difficult demoulding was resolved. |
| |
| Keywords: | injection mould headphone bracket pinpoint gate side core pulling inclined ejecting block |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
