| 聚氨酯海绵浸渗法制备高孔隙率泡沫铜 |
| |
| 引用本文： | 吴 成,乔冠军,王红洁,金志浩.聚氨酯海绵浸渗法制备高孔隙率泡沫铜[J].稀有金属材料与工程,2009,38(4):722-725. |
| |
| 作者姓名： | 吴 成 乔冠军 王红洁 金志浩 |
| |
| 作者单位： | 西安交通大学,金属材料强度国家重点实验室,陕西,西安,710049 |
| |
| 基金项目： | 国家重点基础研究发展规划(973计划) |
| |
| 摘 要： | 采用聚氨酯海绵浸渗法制备了具有高孔隙率(85%～95%)、通孔结构的泡沫铜.根据聚氨酯海绵浸渗法的工艺特点讨论了泡沫铜的烧结制度,分析检测了泡沫铜成分,并对一次浸渗和二次浸渗两种工艺流程制备得到的泡沫铜的孔隙形貌和压缩性能进行了对比.结果表明,通过二次浸渗工艺可以改变泡沫铜孔壁微观组织结构,并在孔隙率下降不大的情况下使泡沫铜的压缩应力平台从0.5 MPa提高到1 MPa,这对改善材料的能量吸收性能具有重要意义.
|
| 关 键 词： | 泡沫铜 烧结 浸渗 孔隙率 |
| 收稿时间： | 2008/3/31 0:00:00 |
| 修稿时间： | 2008/6/20 0:00:00 |
Preparation of High Porosity Copper Foam by Polyurethane Sponge Impregnation Method |
| |
| Wu Cheng,Qiao Guanjun,Wang Hongjie and Jin Zhihao.Preparation of High Porosity Copper Foam by Polyurethane Sponge Impregnation Method[J].Rare Metal Materials and Engineering,2009,38(4):722-725. |
| |
| Authors: | Wu Cheng Qiao Guanjun Wang Hongjie and Jin Zhihao |
| |
| Abstract: | The polyurethane sponge impregnation method was used to prepare copper foam with a high porosity(85%~95%) and open-cell structure.The sintering technology was discussed in accordance with the characteristics of this method.Additionally,the composition of copper foam was analyzed and the microstructure and compressive performances of copper foam fabricated by single-impregnating and double-impregnating were measured and compared.It is indicated that the microstructure at cell wall of the copper foam can be c... |
| |
| Keywords: | copper foam sintering impregnation porosity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
