首页 | 本学科首页   官方微博 | 高级检索  
     

聚四氟乙烯/陶瓷/玻璃纤维复合介质的性能研究
引用本文:刘敏,周洪庆,朱海奎. 聚四氟乙烯/陶瓷/玻璃纤维复合介质的性能研究[J]. 兵器材料科学与工程, 2006, 29(6): 32-35
作者姓名:刘敏  周洪庆  朱海奎
作者单位:南京工业大学,材料科学与工程学院,江苏,南京,210009;南京工业大学,材料科学与工程学院,江苏,南京,210009;南京工业大学,材料科学与工程学院,江苏,南京,210009
摘    要:采用热压工艺制得聚四氟乙烯/陶瓷/玻璃纤维复合介质材料。复合介质材料的介电常数随着PTFE和玻璃纤维含量的增加而减小;当复合介质中不含玻璃纤维时,随着陶瓷粉料的质量分数从40%增加到65%时,材料的弹性模量先减小后增加;加入玻璃纤维可以增加材料的弹性模量,对于PTFE的质量分数为40%的复合介质,玻璃纤维加入的质量分数不应大于15%,聚四氟乙烯/陶瓷/玻璃纤维复合介质的微观结构致密、形成了完整的一体。

关 键 词:聚四氟乙烯  陶瓷  玻璃纤维  复合介质  力学性能  介电性能
文章编号:1004-244X(2006)06-0032-04
收稿时间:2006-07-27
修稿时间:2006-09-29

Study on properties of PTFE/ceramics/glassfibers composite dielectrics
LIU Min,ZHOU Hong-qing,ZHU Hai-kui. Study on properties of PTFE/ceramics/glassfibers composite dielectrics[J]. Ordnance Material Science and Engineering, 2006, 29(6): 32-35
Authors:LIU Min  ZHOU Hong-qing  ZHU Hai-kui
Affiliation:College of Material Science and Engineering, Nanjing University of Technology, Nanjing 210009, China
Abstract:The composite dielectrics mainly composed of PTFE, ceramics and glassfibers are prepared by hot pressing.Dielectric constant of the composites decreases with amount of PTFE and glassfibers increasing. For PTFE/ceramics composites, the elastic modulus increases at first and then decreases with the amount of ceramics increasing from 40% to 65%. The addition of glassfibers in PTFE/ceramics can increase elastic modulus. And for composite dielectrics containing 40% PTFE, the amount of glassfibers should be less than 15%. The composites microstructures are very dense
Keywords:PTFE   ceramics    glassfibers    composite dielectrics   mechanical properties    dielectric properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号