| 共聚聚丙烯EPF30R作汽车保险杠专用料研究 |
| |
| 引用本文： | 李荣勋,涂劲松,李艳霞,杨智明,冯少华,刘光烨.共聚聚丙烯EPF30R作汽车保险杠专用料研究[J].现代塑料加工应用,2001,13(3):23-26. |
| |
| 作者姓名： | 李荣勋 涂劲松 李艳霞 杨智明 冯少华 刘光烨 |
| |
| 作者单位： | 青岛化工学院塑料工程技术研究院 |
| |
| 摘 要： | 在共聚聚丙烯新产品EPF30R中加入少量的EPS30R为基体对脂，用POE（辛烯-乙烯共聚物）为增韧剂、PP-g-MAH为相容剂、滑石粉为填料制得性能符合要求的汽车保险杠专用料，并研究了增韧剂、相容剂、无机填料的含量对共混材料性能的影响。结果表明：EPF30R/EPS30R质量比为85/15，POE用量为15份，相容剂用量10份，无机填料为12份时，专用料的性能达到国内外同类产品的指标。
|
| 关 键 词： | 聚丙烯共聚物 增韧 汽车保险杠 专用料 EPF30R |
| 修稿时间： | 2000年12月26 |
The Study of a Novel Propylene Copolymer EPF30R as Automobile Bumpers |
| |
| Li Rongxun Tu Jinsong Li Yanxia Yang Zhiming,Feng Shaohua Liu Guangye.The Study of a Novel Propylene Copolymer EPF30R as Automobile Bumpers[J].Modern Plastics Processing and Applications,2001,13(3):23-26. |
| |
| Authors: | Li Rongxun Tu Jinsong Li Yanxia Yang Zhiming Feng Shaohua Liu Guangye |
| |
| Abstract: | A new automobile bumper material was devloped by using a novel propylene copolymer EPF30R blended with EPS30R as base resin, POE as toughening agent, PP- g- MAH as compatibilizer and TALC as filler. The influence of the content of toughing agent, comatibilizer and filler on the properties of the compound was studied . Results showed that the property of the special material can meet the standards for similar products both at home and abroad when the conditions were as follows: weight ratio of EPF30R/EPS30R was 85/15; POE content was 15phr,compatibilizer content 10phr,and inorganic filler content 15phr. |
| |
| Keywords: | polypropylene copolymer toughening automobile special materials |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
