| 面接触多阶变径组合航空拖缆的研制 |
| |
| 引用本文： | 冯春玲,张庆华,贾宝楠,史书祥.面接触多阶变径组合航空拖缆的研制[J].金属制品,2006,32(1):1-3. |
| |
| 作者姓名： | 冯春玲 张庆华 贾宝楠 史书祥 |
| |
| 作者单位： | 天津市金鼎一绳钢丝绳有限公司,300200;中国人民解放军92419部队,兴城,125106 |
| |
| 基金项目： | 解放军海军科技进步三等奖项目 |
| |
| 摘 要： | 对面接触多阶变径组合航空拖缆研制中需解决的关键技术进行论述。选用72钢盘条作为拖缆钢丝原料,拉丝采用多道次、小压缩率、适当低速的方法,面接触成型采用固定整体模拔法,适当增大拉拔模的入口角、工作锥角、定径带长度,并选用适宜的润滑油冷却和润滑,成型缆绳达到设计要求。
|
| 关 键 词： | 面接触 航空拖缆 压缩率 不旋转性能 接头方式 |
| 收稿时间： | 2005-08-20 |
| 修稿时间： | 2005年8月20日 |
Development of Facial Contacted Combination Aerial Drag-cable with Multi-steps Diameter Change |
| |
| Feng Chunling,Zhang Qinghua,Jia Baonan,Shi Shuxiang.Development of Facial Contacted Combination Aerial Drag-cable with Multi-steps Diameter Change[J].Steel Wire Products,2006,32(1):1-3. |
| |
| Authors: | Feng Chunling Zhang Qinghua Jia Baonan Shi Shuxiang |
| |
| Abstract: | To expound the key technology needing to settle in the course of development of facial contacted combination aerial drag-cable with multi-steps diameter change, 72 steel wire rod is used as raw material for drag-cable steel wire, the drawing method of multi-pass, little draught and suitable low speed is adopted, the fixed integration die drawing method is adopted when facial contacting is formed. The design demand of formed cable is reached by suitably increasing inlet angle, working cone angle and sizing zone of wire drawing die, and selecting and using suitable lubrication oil to cool and lubricate. |
| |
| Keywords: | facial contact aerial drag-cable draught non-rotation property joint mode |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
