| 紫外光固化环氧丙烯酸树脂导电胶 |
| |
| 引用本文： | 刘彦军,常英.紫外光固化环氧丙烯酸树脂导电胶[J].中国胶粘剂,2005,14(8):27-30,37. |
| |
| 作者姓名： | 刘彦军 常英 |
| |
| 作者单位： | 大连轻工业学院化材学院,辽宁省,大连市,116034 |
| |
| 基金项目： | 03年大连市科委留学回国基金. |
| |
| 摘 要： | 以环氧丙烯酸树脂为基体树脂、微米级片状铜粉为导电填料制备紫外光固化导电胶,采用光引发剂与热引发剂复合引发体系实现导电胶的深层固化。对紫外光固化导电胶的影响因素进行研究,制备出的导电胶电阻率可达1.3×10-3Ωcm,剪切强度为1.3MPa。
|
| 关 键 词： | 环氧丙烯酸树脂 导电胶 紫外光固化 |
| 文章编号： | 1004-2849（2005）08-0027-05 |
| 收稿时间： | 2005-01-04 |
| 修稿时间： | 2005-01-04 |
Study on UV-curing acrylated epoxy resin electrically conductive adhesives |
| |
| LIU Yan-jun,CHANG Ying.Study on UV-curing acrylated epoxy resin electrically conductive adhesives[J].China Adhesives,2005,14(8):27-30,37. |
| |
| Authors: | LIU Yan-jun CHANG Ying |
| |
| Abstract: | UV Curing copper conductive adhesive was prepared by using acrylated epoxy resin , micron flake copper as conductive fillers,light and heat initiator were used to achieve deep cure of conductive adhesive .The UV-curing conductive adhesive influence factor was studied and the conductive adhesive's resistance rate was 1.3×10-3Ω.cm, shear strength was 1.3MPa. |
| |
| Keywords: | acrylated epoxy resin conductive adhesive UV curing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
