| 玻璃钢管的高速旋转模塑成型工艺研究 |
| |
| 引用本文： | 孔祥丽,宋本超,张恒,张军,杨乾熙. 玻璃钢管的高速旋转模塑成型工艺研究[J]. 塑料工业, 2007, 35(11): 40-42 |
| |
| 作者姓名： | 孔祥丽 宋本超 张恒 张军 杨乾熙 |
| |
| 作者单位： | 郑州大学材料工程学院,河南,郑州,450052;枣庄科技职业学院,山东,滕州,277500 |
| |
| 摘 要： | 介绍了一种高速旋转模塑工艺成型纤维增强树脂基复合材料制品新技术，研究了该工艺的工艺方法及成型原理。并以成型玻璃钢管为例进行实验研究，分析了成型过程中所选转速对制品质量的影响及制品成型的时间控制问题。结果表明：该方法通过增强树脂浸润纤维的驱动力可以提高制品质量和制品的生产效率。
|
| 关 键 词： | 旋转模塑 离心成型 玻璃钢 |
| 文章编号： | 1005-5770（2007）11-0040-03 |
| 修稿时间： | 2007-07-31 |
Study on High-speed Rotational Molding Processing of Glass Fiber Reinforced Polyester Pipe |
| |
| KONG Xiang-li,SONG Ben-chao,ZHANG Heng,ZHANG Jun,YANG Qian-xi. Study on High-speed Rotational Molding Processing of Glass Fiber Reinforced Polyester Pipe[J]. China Plastics Industry, 2007, 35(11): 40-42 |
| |
| Authors: | KONG Xiang-li SONG Ben-chao ZHANG Heng ZHANG Jun YANG Qian-xi |
| |
| Affiliation: | 1. College of Materials Eng., Zhengzhou University, Zhengzhou 450052, China; 2. Zaozhuang Vocational College of Technology, Zaozhuang 277500, China |
| |
| Abstract: | A novel technology of high-speed rotational molding for glass fiber reinforced composite product is introduced. The technique and its molding principle were studied. Taking the molding of the glass fiber reinforced polyester pipe as an example, the influence of the rotational speed on the product quality, and the control of the molding time in the molding process were analyzed. The results showed the quality and production efficiency of the product could be improved by increasing the driving power of the infiltration of the fiber by resin. |
| |
| Keywords: | Rotational Molding Centri Fugal Molding Glass Fiber Reinforced Polyester |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
