| 喷放罐进料口的应力分析 |
| |
| 引用本文： | 杜四宏,徐敏强. 喷放罐进料口的应力分析[J]. 化工技术与开发, 2014, 0(9): 47-49 |
| |
| 作者姓名： | 杜四宏 徐敏强 |
| |
| 作者单位： | 1. 中国核电工程有限公司郑州分公司,河南郑州,450052
2. 郑州大学化工设备设计研究所,河南郑州,450002 |
| |
| 摘 要： | 利用Ansys 12.0对喷放罐进料口进行了有限分析，得到了其受力特性和应力分布规律，并对其进行了应力强度评定。
|
| 关 键 词： | 进料口 应力分析 有限单元 强度评定 |
Stress Analysis of Feed Inlet of Explosion Pulping Equipment |
| |
| DU Si-hong,XU Min-qiang. Stress Analysis of Feed Inlet of Explosion Pulping Equipment[J]. Technology & Development of Chemical Industry, 2014, 0(9): 47-49 |
| |
| Authors: | DU Si-hong XU Min-qiang |
| |
| Affiliation: | DU Si-hong;XU Min-qiang;Zhengzhou Branch,China Nuclear Power Engineering Co. Ltd.;Institute of Chemical Equipment Design,Zhengzhou University; |
| |
| Abstract: | Finite element analysis was used to the feed inlet of explosion pulping equipment based on the basis of Ansys12.0, its stress characteristics was draw. With regard to dangerous section, the strength assessment was carried out. |
| |
| Keywords: | feed inlet stress analysis finite element strength assessment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
