Stopband performance improvement of rectangular waveguide filtersusing stepped-impedance resonators

Rectangular waveguide stepped-impedance resonators (SIRs) are analyzed and employed in the design of an X-band filter with center frequency f₀ = 10 GHz and a bandwidth of 100 MHz. An attenuation of 80 dB is held up to 23.1 GHz and, compared to standard uniform-impedance-resonator filters, a reduction in length of 55 % is achieved at the expense of an increased insertion loss from 0.6 to 1.5 dB. The second resonance of the fundamental TE₁₀ mode can be controlled by adjusting the length and impedance ratio of each resonator. A design procedure that takes into account step discontinuities is described and applied to the design of a number of SIR filters. Finally, the presented theory is supported with experimental results