首页 | 本学科首页   官方微博 | 高级检索  
     

基于CPLD和多处理器结构的控制网络节点设计
引用本文:彭可,陈岚,李仲阳,陈志盛.基于CPLD和多处理器结构的控制网络节点设计[J].计算机工程与应用,2005,41(23):209-212.
作者姓名:彭可  陈岚  李仲阳  陈志盛
作者单位:湖南师范大学工学院,长沙,410081;中南大学信息科学与工程学院,长沙,410083;中南大学信息科学与工程学院,长沙,410083;湖南师范大学工学院,长沙,410081
基金项目:湖南省科技厅工业攻关项目(编号:00GKY2053)
摘    要:节点是控制网络系统的基本构成单元。论文提出了一种基于CPLD和多处理器结构的控制网络节点设计方法。它能够提高单节点的并行处理能力,其模块化结构增强了节点的可靠性;不同处理器之间的连接形式可以通过VHDL等软件在线改变,使得节点柔性与扩展性提高。同时,其软件可按照不同处理器模块分步开发,软件结构也得以简化,有利于节点的调试。遵循该方法,成功开发出一种多功能LonWorks控制网络节点。

关 键 词:控制网络节点  CPLD  多处理器结构  功能模块化  LonWorks
文章编号:1002-8331-(2005)23-0209-04
收稿时间:2005年5月
修稿时间:2005年5月

A Design Method for Control Network Nodes Based on CPLD and Multi-processor Architecture
Peng Ke,Chen Lan,Li Zhongyang,Chen Zhisheng.A Design Method for Control Network Nodes Based on CPLD and Multi-processor Architecture[J].Computer Engineering and Applications,2005,41(23):209-212.
Authors:Peng Ke  Chen Lan  Li Zhongyang  Chen Zhisheng
Abstract:Nodes are basic units of control network.A design method for control network nodes based on CPLD and multi-processor architecture is proposed in this paper.This method promotes computational ability of single node and its architecture of function modules enhances the reliability.Meanwhile,connection among processors in the same node can be changed via VHDL software in system,thus it results in more flexibility and extensibility.The software of control nodes is developed according to different processors separately,which simplifies software structure and its debugging. Following this method,a multifunctional LonWorks control node has been developed in practical application.
Keywords:control network nodes  CPLD  multi-processor architecture  function modules  LonWorks
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号