| 6061铝合金TTP曲线的研究 |
| |
| 引用本文： | 刘露露,潘学著,高萌,陈彬,王迎新,王孟君. 6061铝合金TTP曲线的研究[J]. 金属热处理, 2012, 37(4): 20-23 |
| |
| 作者姓名： | 刘露露 潘学著 高萌 陈彬 王迎新 王孟君 |
| |
| 作者单位： | 1. 中南大学有色金属材料科学与工程教育部重点实验室,湖南长沙,410083
2. 广亚铝业有限公司,广东佛山,528237 |
| |
| 摘 要： | 通过分级淬火法获得了6061铝合金TTP曲线,计算了淬火敏感温度区间的淬火因子,结合淬火因子分析法预测了在不同淬火冷却速率条件下合金的硬度,并与实测值进行对比。结果表明:6061铝合金TTP曲线的"鼻尖"温度约为340℃,淬火敏感温度区间为220～455℃;合金硬度的预测值与实测值吻合较好,淬火因子分析法预测合金的性能具有较高的准确度;合金在淬火敏感温度区间220～455℃的淬火冷却速率大于16.2℃/s时,合金的硬度能达到最大硬度值的95%以上。
|
| 关 键 词： | 6061铝合金 TTP曲线 淬火速率 淬火因子分析法 |
TTP curves of 6061 aluminum alloy |
| |
| LIU Lulu,PAN Xuezhu,GAO Meng,CHENG Bin,WANG Yingxin,WANG Mengjun. TTP curves of 6061 aluminum alloy[J]. Heat Treatment of Metals, 2012, 37(4): 20-23 |
| |
| Authors: | LIU Lulu PAN Xuezhu GAO Meng CHENG Bin WANG Yingxin WANG Mengjun |
| |
| Affiliation: | 1(1.The Key Laboratory of Nonferrous Metal Materials Science and Engineering of Ministry of Education,Central South University,Changsha Hunan 410083,China;2.Guang Ya Aluminum Co.,Ltd.,Foshang Guangdong 410082,China) |
| |
| Abstract: | Through the TTP curves of 6061 aluminum alloy evaluated by interrupted quenching method,the quench factor during the critical temperature range was calculated.With the quench factor analysis method,the hardness of the alloy was predicted in conditions of different cooling rate and compared with the measured values.The results show that the nose temperature of TTP curves is 340 ℃ and the critical temperature range is 220-455 ℃.The predicted results agree reasonably well with the measured values.The quench factor analysis method has high accuracy of predicting alloy property.The cooling rate in the critical temperature range of 220-455 ℃ should be more than 16.2 ℃/s,so that the hardness of alloy will attain above 95% of the maximum hardness. |
| |
| Keywords: | 6061 aluminum alloy TTP curves cooling rate quench factor analysis method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
