首页 | 本学科首页   官方微博 | 高级检索  
     

真空热处理条件下镍基高温合金的表面反应和润湿行为
引用本文:李文,金涛.真空热处理条件下镍基高温合金的表面反应和润湿行为[J].金属热处理,2012,37(5):58-60.
作者姓名:李文  金涛
作者单位:1. 沈阳理工大学材料科学与工程学院,辽宁沈阳110159/中国科学院金属研究所,辽宁沈阳110016
2. 中国科学院金属研究所,辽宁沈阳,110016
摘    要:用俄歇谱仪对真空热处理条件下镍基高温合金的表面成分进行分析,利用润湿测量系统研究了Ni-15Cr-3.5B合金熔体在镍基合金基片上的润湿行为。结果表明,镍基高温合金基片表面有一层氧化铝膜,该氧化膜在真空加热时的厚度增加;Ni-15Cr-3.5B熔态合金润湿镍基合金基片时,氧化膜开裂,熔化的合金渗过裂缝,在氧化膜下铺展,具有良好的润湿性。

关 键 词:镍基高温合金  Ni-15Cr-3.5B合金  表面反应  润湿

Surface reactions and wetting behavior of Ni-base superalloy under vacuum heat treatment
LI Wen,JIN Tao.Surface reactions and wetting behavior of Ni-base superalloy under vacuum heat treatment[J].Heat Treatment of Metals,2012,37(5):58-60.
Authors:LI Wen  JIN Tao
Affiliation:1.College of Materials Science and Engineering,Shenyang Ligong University,Shenyang Liaoning 110159,China; 2.Institute of Metal Research,Chinese Academy of Sciences,Shenyang Liaoning 110016,China)
Abstract:The surface compositions of Ni-base superalloy under vacuum heat treatment were investigated by AES.The wetting behavior of molten Ni-15Cr-3.5B alloy on the superalloy substrate was studied by the measuring apparatus of wetting ability.The results show that the aluminum oxide film is formed on the surface of Ni-base superalloy substrate and the thickness of the film increases with the increase of the temperature of vacuum heat treatment.During wetting process,the oxidation film of the Ni-base substrate surface splits,then the molten alloy soaks through the cracks and spreads below the oxidation film.The wetting ability of molten alloy on the substrate is good.
Keywords:Ni-base superalloy  Ni-15Cr-3  5 B alloy  surface reaction  wetting
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号