|
|||||
|
|
| 超高强度热轧钢板冷冲压开裂原因及分析 | |
| 引用本文： | 赵培林,孙新军,雍岐龙,路峰. 超高强度热轧钢板冷冲压开裂原因及分析[J]. 金属热处理, 2012, 37(7): 122-126 |
| 作者姓名： | 赵培林 孙新军 雍岐龙 路峰 |
| 作者单位： | 1. 钢铁研究总院结构材料研究所,北京100081 莱芜钢铁集团技术中心,山东莱芜271104 2. 钢铁研究总院结构材料研究所,北京,100081 3. 莱芜钢铁集团技术中心,山东莱芜,271104 |
| 摘 要： | 针对屈服强度700 MPa级超高强度热轧钢板冷冲压时出现开裂现象,对其剪切加工方式以及剪切材料端部进行了研究。结果表明,剪切端局部加工硬化以及大量残留的微裂纹扩展是700 MPa级热轧超高强钢板冲压产生开裂的主要原因。通过边缘局部回火或局部修磨去除裂纹源,可避免出现开裂或者降低开裂几率。 |
| 关 键 词： | 超高强钢 热轧钢带 冷冲压 开裂 加工硬化 微裂纹 |
Crack analysis of super high strength steel plate during cold stamping process |
|
| ZHAO Peilin,SUN Xinjun,YONG Qilong,LU Feng. Crack analysis of super high strength steel plate during cold stamping process[J]. Heat Treatment of Metals, 2012, 37(7): 122-126 | |
| Authors: | ZHAO Peilin SUN Xinjun YONG Qilong LU Feng |
| Affiliation: | 1.Institute of Structure Materials,Central Iron and Steel Research Institute,Beijing 100081,China; 2.Laisteel Group R&D Center,Laiwu Shandong 271104,China) |
| Abstract: | In accordance with crack of 700 MPa(yield strength) grade steel during the cold stamping process,the shear mode and the end of sheared steel were studied.The results show that local work hardening of the end of sheared steel and residual micro-crackle are main reasons that lead to crack with 700 MPa grade steel.The crack can be avoided or the rate of crack can be decreased through tempering with end of sheared steel and edge grinding to eliminate the crack source. |
| Keywords: | super high strength steel hot rolled strip steel cold stamping cracking work hardening micro crackle |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |