首页 | 本学科首页   官方微博 | 高级检索  
     

紫外线辐照HDPE与尼龙-6共混材料结构与力学性能的研究
引用本文:徐僖,雷景新. 紫外线辐照HDPE与尼龙-6共混材料结构与力学性能的研究[J]. 高分子材料科学与工程, 1996, 0(3)
作者姓名:徐僖  雷景新
作者单位:高分子材料工程国家重点实验室,成都科技大学高分子研究所
基金项目:福特中国研究与发展基金,国家自然科学基金
摘    要:研究了紫外线辐照HDPE与PA6共混材料的微观形态、结晶结构、熔融行为及力学性能。SEM、WAXD、DSC结果表明,随紫外线辐照时间的增加,共混物中PA6的粒径减小,与基体作用加强,HDPE晶面间距增大,熔点、结晶度降低,熔程变窄。力学性能测试结果表明,紫外线辐照能明显提高共混材料(uHDPE/PA6:90/10)的拉伸强度、断裂伸长率、拉伸断裂能和冲击强度。当辐照时间超过144h由于HDPE热稳定性明显降低,共混过程中HDPE热降解严重,共混物的韧性突降。

关 键 词:紫外线辐照,高密度聚乙烯,尼龙-6

STUDY ON THE STRUCTURES AND MECHANICAL PROPERTIES OF ULTRAVIOLET IRRADIATED HDPE/PA6 BLENDS
Xu Xi,Lei Jingxin. STUDY ON THE STRUCTURES AND MECHANICAL PROPERTIES OF ULTRAVIOLET IRRADIATED HDPE/PA6 BLENDS[J]. Polymer Materials Science & Engineering, 1996, 0(3)
Authors:Xu Xi  Lei Jingxin
Abstract:The morphologies,crystallizing behavior and mechanical properties of ultraviolet irradiated HDPE/PA6 blends were studied through SEM, WAXD,DSC and mechanical properties test. The results show that the particle size of PA6 in the blends is reduced and PA6 phase becomes indistinguishable with the time of ultraviolet irradiation,the d-spacing of crystal planes of HDPE in the blends are increased,the melting temperature and crystallinity are decreased.The tensile and impact strength, Young's modulus,elongation at break and tensile energy absorption of the blend (uHDPE/PA6:90/10)are enhanced quite a lot after ultraviolet irradiation. As irradiation time exceeds 144 hours, the toughness of the blends decreases abruptly because of serious degradation of HDPE in the blends during irradiating and mixing stages.
Keywords:s: ultraviolet irradiation   high density polyethylene  nylon 6  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号