首页 | 本学科首页   官方微博 | 高级检索  
     

PET与PBT配比对阻燃增强PET/PBT合金表面浮纤的影响
引用本文:殷年伟,陈锋,付学俊,曹绍强. PET与PBT配比对阻燃增强PET/PBT合金表面浮纤的影响[J]. 中国塑料, 2021, 35(12): 32-36. DOI: 10.19491/j.issn.1001-9278.2021.12.006
作者姓名:殷年伟  陈锋  付学俊  曹绍强
作者单位:金发科技股份有限公司,广州 510663
摘    要:研究了不同聚对苯二甲酸乙二醇酯(PET)和聚对苯二甲酸丁二醇酯(PBT)配比对阻燃增强PET/PBT合金表面浮纤的影响.采用二次元影像测试仪和目测的方式,半定量地表征表面浮纤.结果表明,随着PBT含量的增加,表面浮纤逐渐减弱;当PET和PBT质量比接近1:1时,材料表面质量最好;进一步提高PBT含量时,表面浮纤现象又逐...

关 键 词:聚对苯二甲酸丁二醇酯  聚对苯二甲酸乙二醇酯  合金  阻燃  增强  表面浮纤
收稿时间:2021-05-25

Effect of mass ratio of PET to PBT on surface of flame retardant reinforced PET/PBT alloy
YIN Nianwei,CHEN Feng,FU Xuejun,CAO Shaoqiang. Effect of mass ratio of PET to PBT on surface of flame retardant reinforced PET/PBT alloy[J]. China Plastics, 2021, 35(12): 32-36. DOI: 10.19491/j.issn.1001-9278.2021.12.006
Authors:YIN Nianwei  CHEN Feng  FU Xuejun  CAO Shaoqiang
Affiliation:Kingfa Science & Technology Co,Ltd,Guangzhou 510663,China
Abstract:In this paper, the effect of mas ratio of PET to PBT on the surface of flame?retardant reinforced PET/PBT Alloy was investigated. The surface fiber?floating phenomenon was characterized semi?quantitatively using a two?dimensional image tester and visual inspection. The results indicated that the surface fiber?floating phenomenon became less serious with an increase in the PBT content. When the ratio of PET to PBT was close to 1:1, the fiber floating became weakest. When the PBT content further increased, the fiber floating became worse. The flame retardant reinforced PBT exhibited weaker fiber floating than the flame retardant reinforced PET.
Keywords:polybutylene terephthalate  polyethylene terephthalate  alloy  flame retardant  reinforcement  surface glass fiber revealed phenomena  
点击此处可从《中国塑料》浏览原始摘要信息
点击此处可从《中国塑料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号