首页 | 本学科首页   官方微博 | 高级检索  
     

利用SEM-EBSP研究多晶体材料高温蠕变损伤组织的不均匀性
引用本文:钟振前,朱衍勇,温泉,于桂玲,董毅,司红,陈兆定.利用SEM-EBSP研究多晶体材料高温蠕变损伤组织的不均匀性[J].物理测试,2005,23(5):4-7.
作者姓名:钟振前  朱衍勇  温泉  于桂玲  董毅  司红  陈兆定
作者单位:1. 钢铁研究总院测试所,北京,100081
2. 北京科技大学材料学院,北京,10083
摘    要:研究了多晶体材料在高温蠕变下的空洞出现位置和损伤特点,认为同一组织下空洞的出现及蠕变损伤的位置与晶粒尺寸有关系,晶粒尺寸小的部位易发生损伤。使用电子背散射衍射技术研究了不同损伤位置附近的亚结构形成情况,结合亚结构、晶界滑移、晶粒尺寸与材料变形协调性等材料变形特点,对蠕变损伤机理进行了探讨。

关 键 词:EBSP  晶界类型  亚晶粒  晶粒尺寸  蠕变空洞  取向差
文章编号:1001-0777(2005)05-0005-04
修稿时间:06 18 2005 12:00AM

Study on Unhomogeneity of Creep Damaged Microstructure for Polystalline by SEM-EBSP
ZHONG Zhen-qian,ZHU Yan-yong,WEN Quan,YU Gui-ling,DONG Yi,SI Hong,CHEN Zhao-ding.Study on Unhomogeneity of Creep Damaged Microstructure for Polystalline by SEM-EBSP[J].Physics Examination and Testing,2005,23(5):4-7.
Authors:ZHONG Zhen-qian  ZHU Yan-yong  WEN Quan  YU Gui-ling  DONG Yi  SI Hong  CHEN Zhao-ding
Affiliation:ZHONG Zhen-qian1,ZHU Yan-yong1,WEN Quan2,YU Gui-ling1,DONG Yi1,SI Hong1,CHEN Zhao-ding
Abstract:The creep cavity location and damage of polycrystalline material was studied, and it was considered that there was a great correlation between the cavity sites, creep damage and grain size, and the damage often occurred in the location where grain size was small. The substructure near the damage position was studied by EBSP, then vonbined with the relationship among substructure grain boundary sliding,grain size and material deformation compatibility the mechanics of creep damage was discussed.
Keywords:EBSP  grain boundary character  grain size  creep cavity  misorientation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号