| 圆弧类涡旋修正齿型泄漏线的计算 |
| |
| 引用本文： | 高秀峰.圆弧类涡旋修正齿型泄漏线的计算[J].流体机械,2004,32(2):17-19. |
| |
| 作者姓名： | 高秀峰 |
| |
| 作者单位： | 西安交通大学,陕西西安,710049 |
| |
| 摘 要： | 分析了圆弧类涡旋修正齿型的啮合特点及啮合规律，由此提出了适用于所有圆弧类修正齿型的涡旋机械工作腔周向及径向泄漏线动态长度的精确计算方法。并对应用较多的动静盘齿端形状相同的修正齿型，给出了泄漏线的简化计算方法，为涡旋机械工作过程的深入研究提供了理论基础。
|
| 关 键 词： | 涡旋机械 齿型修正 泄漏通道 |
| 文章编号： | 1005-0329(2004)02-0017-03 |
| 修稿时间： | 2003年3月11日 |
Calculation on Length of Leakage Lines in Scroll Machinery Modified by Arc-shaped Curves |
| |
| GAO Xiu,feng.Calculation on Length of Leakage Lines in Scroll Machinery Modified by Arc-shaped Curves[J].Fluid Machinery,2004,32(2):17-19. |
| |
| Authors: | GAO Xiu feng |
| |
| Abstract: | Meshing properties and regulations for scroll machinery modified by arc shaped curves are analyzed An accurate method to calculate the lengths of radial or tangential leakage lines is obtained and a simplified method is presented if the fix and moving scrolls have the same shape. This study offers a basis to study the working process in depth. |
| |
| Keywords: | scroll machinery wrap modification leakage channels |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
