首页 | 本学科首页   官方微博 | 高级检索  
     

外置瑞士卷多孔介质燃烧器贫燃试验
引用本文:马培勇,唐志国,史卫东,何贤钊,林其钊.外置瑞士卷多孔介质燃烧器贫燃试验[J].中国电机工程学报,2010(11).
作者姓名:马培勇  唐志国  史卫东  何贤钊  林其钊
作者单位:中国科学技术大学热科学和能源工程系;合肥工业大学机械与汽车工程学院;
基金项目:国家863高技术基金项目(2006AA05Z210)~~
摘    要:对一种新型外置瑞士卷多孔介质燃烧器的贫燃特性进行了试验研究,对其点火预热启动过程及其不同预混气体浓度、流量等工况参数条件下的温度分布、排放特性进行了测量;分析燃烧器的启动方法以及流量、预混气体浓度等有关工况参数对其燃烧特性的影响规律。结果表明,燃烧器冷启动时甲烷氧化率较低,有大量的CO生成;由于多孔介质的存在,燃烧器整体升温较慢,无局部高温,NOx生成量较小;在相同预混气甲烷浓度条件下稳定燃烧时,此类型燃烧器相对无瑞士卷结构的多孔介质燃烧器,在同一预混气甲烷浓度条件下对流量具有较好的适应性,火焰稳定性好;预混气甲烷浓度越大、驻留时间越长、燃烧温度越高,甲烷氧化率也越大。

关 键 词:瑞士卷  多孔介质燃烧器  贫燃  氧化率  

Experiment on Lean Fuel Combustion in Porous Media Combustor With External Swiss-roll
MA Pei-yong,TANG Zhi-guo,SHI Wei-dong,HE Xian-zhao,LIN Qi-zhao.Experiment on Lean Fuel Combustion in Porous Media Combustor With External Swiss-roll[J].Proceedings of the CSEE,2010(11).
Authors:MA Pei-yong  TANG Zhi-guo  SHI Wei-dong  HE Xian-zhao  LIN Qi-zhao
Affiliation:MA Pei-yong1,TANG Zhi-guo2,SHI Wei-dong1,HE Xian-zhao1,LIN Qi-zhao1 (1. Department of Thermal Science , Energy Engineering,University of Science , Technology of China,Hefei,230026,China,2. School of Mechanical , Automobile Engineering,Hefei University of Technology,230009,China)
Abstract:An experimental study was carried out on the startup and lean combustion characteristics of a new type porous media combustor with external Swiss-roll (SRPC). The temperature profiles and pollutant emission were measured in the startup process of preheating by ignition, and at various working parameters including fuel concentration and gas flow rate. The influences of the major parameters on the combustion characteristics of SRPC were analyzed. The results show the burn-out rate of methane in the premixed g...
Keywords:Swiss-roll  porous media combustor  lean combustion  burn-out rate  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号