| 气门毛坯局部镦挤终锻成形工艺研究 |
| |
| 引用本文： | 章争荣,黄丹娜,莫东强,孙友松. 气门毛坯局部镦挤终锻成形工艺研究[J]. 锻压技术, 2009, 34(5). DOI: 10.3969/j.issn.1000-3940.2009.05.001 |
| |
| 作者姓名： | 章争荣 黄丹娜 莫东强 孙友松 |
| |
| 作者单位： | 1. 广东工业大学,材料与能源学院,广东,广州,510006
2. 怀集登云汽配股份有限公司,广东,怀集,526400 |
| |
| 基金项目： | 广东省教育部产学研结合示范基地项目，广东省教育部产学研结合项目 |
| |
| 摘 要： | 根据气门毛坯楔横轧-模锻成形工艺中楔横轧和终锻工艺特点及要求,设计了不同初始直径的预成形坯料,运用DEFORM-2D软件对其终锻时的局部镦挤成形过程进行数值模拟,获得了终锻成形中头部金属将同时产生径向和轴向流动、轴向流动导致杆部增长以及工件内变形分布等规律,根据杆部增长量与预成形毛坯形状尺寸及成形条件的关系,确立了预成形毛坯的设计原则,采用终成形实验验证了预成形毛坯设计的正确性.实验表明,楔横轧-模锻工艺能获得高组织性能的气门毛坯.
|
| 关 键 词： | 气门毛坯 楔横轧 终锻 数值模拟 |
Research on local upsetting finish forging process of valve blank |
| |
| ZHANG Zheng-rong,HUANG Dan-na,MO Dong-qiang,SUN You-song. Research on local upsetting finish forging process of valve blank[J]. Forging & Stamping Technology, 2009, 34(5). DOI: 10.3969/j.issn.1000-3940.2009.05.001 |
| |
| Authors: | ZHANG Zheng-rong HUANG Dan-na MO Dong-qiang SUN You-song |
| |
| Affiliation: | ZHANG Zheng-rong1,HUANG Dan-na1,MO Dong-qiang2,SUN You-song1(1.Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China,2.Huaiji Dengyun Auto-Parts(Holding)Co.,Ltd.,Huaiji 526400,China) |
| |
| Abstract: | According to processing characteristics of roll forming-forging process of valve blank,several kinds of performing blank with different initial diameters for finish forging were designed.Local upsetting finish forging process was simulated by DEFORM-2D,and some deforming rules on metal flow,strain distribution and lengthening of valve rod were obtained.Design principle of performing blank was presented based on the relation between rod lengthening and dimension of blank and deforming conditions.Finish forgi... |
| |
| Keywords: | valve blank roll forming finish forging numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
