Hot Corrosion Behavior and Microstructural Change of Al-Gradient CoNiCrAlYSi Coatings, Produced by LVPS and Diffusional Processes |
| |
Authors: | Majid Mohammadi Seid Ahmad Jenabali Jahromi Sirus Javadpour Akira Kobayashi Kurosh Shirvani |
| |
Affiliation: | 1. Department of Materials Science and Engineering, Shiraz University, Shiraz, Iran 2. Joining & Welding Research Institute, Osaka University, Ibaraki, Osaka, 567-0047, Japan 3. Department of Advanced Materials and New Energies, Iranian Research Organisation for Science and Technology (IROST), Tehran, 15815-3538, Iran
|
| |
Abstract: | Conventional and gradient CoNiCrAlYSi coatings were produced by using low vacuum plasma spray and an additional step of diffusional over aluminizing (pack cementation) techniques on an Inconel-738 substrate. Hot corrosion of these coatings was investigated using Na2SO4–20wt%NaVO3 molten salt at 880?°C for 800?h. Hot corrosion rate was determined by measuring the weight gain of the specimens at regular intervals for a duration of 20?h. X-ray diffraction, field emission scanning electron microscopy and electron probe micro analysis techniques were used to determine the nature of phases, investigation of the thermally grown oxide, examination of the surface attack and determination of the elemental distribution. The gradient coating showed better performance by re-healing alumina scale due to its possession of more β phase as Al reservoir. Results indicated that pack cementation process caused an increase in amount of aluminum-rich β phase and better hot corrosion properties of gradient coatings owing to the Al enrichment in the outer layer and rapid formation of protective oxide on the surface. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|