| 模压对压力容器板材韧性的影响 |
| |
| 引用本文： | 李建中,王劲松,钱小兵,刘伟. 模压对压力容器板材韧性的影响[J]. 阀门, 2009, 0(5): 17-18,43 |
| |
| 作者姓名： | 李建中 王劲松 钱小兵 刘伟 |
| |
| 作者单位： | 无锡大夏金属材料有限公司,江苏无锡214001 |
| |
| 摘 要： | 探讨了锻压结合正火热处理工艺对ASTMA516GR70压力容器板材的显微组织、强度、低温冲击韧性的影响。在奥氏体化的始锻温度下进行模压及正常和快速风冷两种冷却方式进行工艺试生产，通过检测出各种不同工艺条件下材质的机械性能，逐渐调整改进工艺方案，达到了材料-46℃低温冲击韧性的特殊要求。
|
| 关 键 词： | 球阀 模压 阀体 ASTM A516 GR70 低温冲击韧性 |
Effect of mould pressing on pressure vessel steel toughness |
| |
| LI Jian-zhong,WANG Jing-song,QIAN Xiao-bing,LIU-Wei. Effect of mould pressing on pressure vessel steel toughness[J]. Valve, 2009, 0(5): 17-18,43 |
| |
| Authors: | LI Jian-zhong WANG Jing-song QIAN Xiao-bing LIU-Wei |
| |
| Affiliation: | ( DAXIA Wuxi metallurgical material co. , Wuxi 214001, China) |
| |
| Abstract: | The effect of mould pressing with normalizing heat treatment processes on microstructure, strength, low temperature impact toughness. Used the beginning forging temperature of austenite and the normal or fast air cooling to run pilot production, tested the corresponding mechanical properties, through comparing and improving of processes, can reach the requirement of low temperature impact value of the customer in minus 46℃. |
| |
| Keywords: | ball valve mould pressing body ASTM A516 GR70 low temperature impact toughness |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
