| 注射模中双滑块二次抽芯机构设计 |
| |
| 引用本文： | 赵建亮,张彦书,王丁强,郑学文.注射模中双滑块二次抽芯机构设计[J].模具工业,2013(11):52-55. |
| |
| 作者姓名： | 赵建亮 张彦书 王丁强 郑学文 |
| |
| 作者单位： | 青岛中科昊泰新材料科技有限公司,山东青岛266300 |
| |
| 摘 要： | 根据塑件的倒扣特点,设计了一种双滑块二次抽芯组合机构,阐述了机构的结构组成及工作原理,对机构的关键技术参数进行了理论分析,经试模证明,该机构设计合理,解决了抽芯时塑件倒扣粘滑块的问题。
|
| 关 键 词： | 注射模 倒扣 滑块 二次抽芯 |
Design of two-step core-pulling mechanism with two sliders in injection mould |
| |
| ZHAO Jian-liang,ZHANG Yan-shu,WANG Ding-qiang,ZHENG Xue-wen.Design of two-step core-pulling mechanism with two sliders in injection mould[J].Die & Mould Industry,2013(11):52-55. |
| |
| Authors: | ZHAO Jian-liang ZHANG Yan-shu WANG Ding-qiang ZHENG Xue-wen |
| |
| Affiliation: | (Qingdao Zhong Ke Hao Tai New Material Science ＆ Technology Co., Ltd., Qingdao, Shandong 266300, China) |
| |
| Abstract: | Based on analysis of the feature of a plastic upended part, a two-step core-pull- ing mechanism with two sliders was designed. The structural composition and working prin- ciple of the mechanism were stated. And the critical technology parameters were studied theoretically. The problem that the part＇s adhering to the slider during the core-pulling was resolved with the application. |
| |
| Keywords: | injection mould upended slider two-step core-pulling |
| 本文献已被 维普 等数据库收录！ |
|
