Fe-0.03Te-0.3Pb-0.9Mn易切削不锈钢润滑滚动磨损机理研究 |
| |
引用本文: | 何银花,王发展,王哲,王永嘉,焦炜,韩双宗. Fe-0.03Te-0.3Pb-0.9Mn易切削不锈钢润滑滚动磨损机理研究[J]. 材料工程, 2015, 0(10): 85-90. DOI: 10.11868/j.issn.1001-4381.2015.10.014 |
| |
作者姓名: | 何银花 王发展 王哲 王永嘉 焦炜 韩双宗 |
| |
作者单位: | 1. 西安建筑科技大学 材料与矿资学院,西安,710055;2. 西安建筑科技大学 材料与矿资学院,西安 710055; 西安建筑科技大学 机电工程学院,西安 710055;3. 西安建筑科技大学 机电工程学院,西安,710055 |
| |
基金项目: | 十二五期间国家科技支撑计划项目 |
| |
摘 要: | 采用润滑滚动磨损实验测试Fe-0.03Te-0.3Pb-0.9Mn易切削不锈钢的表面摩擦磨损特性。比较不同磨损时间球珠作用下合金表面磨损形貌、体系硬度、摩擦因数和磨损体积的差异,并对其润滑滚动磨损机理进行深入研究。结果表明:磨损启动期,合金表面磨损性能相对稳定,在MnS和Pb等易切削相交互作用下,合金表面犁削底部开始产生裂纹;磨损稳定期,合金表面性能逐渐变化,犁削底部裂纹持续生长,交织的裂纹开始产生片状或块状凸起物;磨损失效期,合金表面润滑膜和剥落物大量脱落,剥落物形成磨料磨损,犁削逐渐贯通消失,合金表面体系相结构快速瓦解。
|
关 键 词: | Fe-0.03Te-0.3Pb-0.9Mn 合金 微观组织 润滑滚动磨损 易切削不锈钢 |
Lubricated Rolling Wear Mechanism Study on Fe-0.03Te-0.3Pb-0.9Mn Free-cutting Stainless Steel |
| |
Abstract: | The friction and wear characteristics of Fe-0.03Te-0.3Pb-0.9Mn free-cutting stainless steel were investigated using a lubricated rolling wear testing apparatus.The wear morphology,hardness, friction coefficient and wear volume of alloy surface were compared in different wear time,its mecha-nism of lubricated rolling wear was studied further.The results show that,at the beginning of wear, the performance of alloy surface wear is relatively stable,under the interaction of free-cutting phase, such as MnS and Pb,that cracks occur at the alloy surface plough bottom;When the wear is stable, the performance of alloy surface changed gradually,the cracks of plough bottom continue growing, interweaved cracks begin to generate flake or block convex parts;When the wear is over,the alloy surface lubrication film and exfoliation numerous are flaking off,exfoliation formed abrasive wear, plough disappeared step by step,the alloy surface system is collapsed rapidly. |
| |
Keywords: | Fe-0.03Te-0.3Pb-0.9Mn alloy microstructure lubricated rolling wear free-cutting stain-less steel |
本文献已被 CNKI 万方数据 等数据库收录! |
|