首页 | 本学科首页   官方微博 | 高级检索  
     

温度参数对供暖系统最大不平衡率的影响
引用本文:孙刚,张殿光,吴华新.温度参数对供暖系统最大不平衡率的影响[J].煤气与热力,2005,25(1):61-62.
作者姓名:孙刚  张殿光  吴华新
作者单位:哈尔滨工程大学建筑工程学院,黑龙江,哈尔滨,150001;哈尔滨工程大学建筑工程学院,黑龙江,哈尔滨,150001;哈尔滨工程大学建筑工程学院,黑龙江,哈尔滨,150001
摘    要:研究了不同设计供回水温差和质调节对下供下回异程式系统允许最大不平衡率的影响。设计供回水温差降低,系统允许最大不平衡率Jmax增大,说明减小设计供回水温差有利于系统的平衡。在系统满足设计要求的前提下,质调节时供热系统更趋于稳定。

关 键 词:分户供暖  最大不平衡率  设计供回水温度  质调节
文章编号:1000-4416(2005)01-0061-02

Influence of Temperature Parameter on Maximum Unbalance Rate of Heating System
SUN Gang,ZHANG Dian-guang,WU Hua-xin.Influence of Temperature Parameter on Maximum Unbalance Rate of Heating System[J].Gas & Heat,2005,25(1):61-62.
Authors:SUN Gang  ZHANG Dian-guang  WU Hua-xin
Abstract:The influence of different design temperature difference between supply water and return water as well as constant flow control on maximum permissible unbalance rate of downfeed and direct return riser system is studied. The maximum permissible unbalance rate J_(max) of the system increases when the design temperature difference between supply water and return water reduces. That shows that reducing design temperature difference between supply water and return water is favourable to the system balance. On the premise of design requirements satisfied by the system, heating system further tends towards stability during constant flow control.
Keywords:individual heating  maximum unbalance rate  design temperature of supply water and return water  constant flow control
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号