首页 | 本学科首页   官方微博 | 高级检索  
     

激光跟踪测量系统的建模与仿真
引用本文:刘万里,曲兴华,闫勇刚.激光跟踪测量系统的建模与仿真[J].石油化工高等学校学报,2007,20(3):50-53.
作者姓名:刘万里  曲兴华  闫勇刚
作者单位:1. 天津大学精密测试技术及仪器国家重点实验室, 天津300072; 2. 河南理工大学精密工程研究所, 河南焦作454000
摘    要:在全面分析了激光跟踪测量系统结构和工作原理的基础上, 建立了系统运动学模型和转镜中心偏移 数学模型。针对以往球坐标激光跟踪测量系统中参考点只能借助于外部具有更高精度的仪器来校正的缺点, 提出 了平面约束自校正方法, 并给出了系统自校正算法。最后对激光跟踪测量系统运动学模型和自校正算法进行了仿 真验证, 结果表明该方法能有效地确定系统实际工作全过程和提高系统跟踪精度与响应速度。

关 键 词:激光跟踪      建模      仿真      自校正  
文章编号:1006-396X(2007)03-0050-04
收稿时间:2007-02-05
修稿时间:2007年2月5日

Modeling and Simulation of Laser Tracking System
LIU Wan-li,QU Xing-hua,YAN Yong-gang.Modeling and Simulation of Laser Tracking System[J].Journal of Petrochemical Universities,2007,20(3):50-53.
Authors:LIU Wan-li  QU Xing-hua  YAN Yong-gang
Abstract:The kinematics model and tracking mirror center offset model of laser tracking system(LTS) were developed,based on the research on structure and working principle of LTS.A method of self-calibration using planar constraints was presented,which eliminates the need of using other higher accuracy instruments to calibrate the reference point in LTS;the self-calibration algorithm for LTS was also established.Finally,dynamic simulations on LTS model and algorithm were given,simulation results show that using these techniques to design and control LTS,the whole working process can be determined effectively,the tracking accuracy and responding speed can be improved quickly.
Keywords:Laser tracking  Modeling  Simulation  Self-calibration
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《石油化工高等学校学报》浏览原始摘要信息
点击此处可从《石油化工高等学校学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号