首页 | 本学科首页   官方微博 | 高级检索  
     

大孔螯合树脂对Pb2+的吸附行为及机理
引用本文:王菲,王连军,李健生,孙秀云,范晨曦. 大孔螯合树脂对Pb2+的吸附行为及机理[J]. 过程工程学报, 2008, 8(3): 466-471
作者姓名:王菲  王连军  李健生  孙秀云  范晨曦
作者单位:南京理工大学化工学院南京理工大学环境科学与工程系南京理工大学化工学院南京理工大学环境科学与工程系南京理工大学环境科学与工程系
基金项目:民爆器材行业技术基础科研基金
摘    要:通过静态和动态吸附实验,研究了Pb2+在D418树脂上的吸附行为,从热力学和动力学方面对吸附过程进行了分析,并通过红外光谱探讨了吸附机理. 结果表明,在所研究的条件范围内,Pb2+在D418树脂上的吸附是吸热过程,同时符合Freundlich和Langmuir等温吸附方程;液膜扩散为Pb2+在D418树脂上吸附速率的主要控制步骤,随着溶液初始浓度的增大,吸附速率逐渐减小;313 K温度下树脂的静态饱和吸附容量为375 mg/g,在298 K下用3 mol/L的硝酸作为解吸剂,解吸率可达97%;最佳的解吸剂用量为5倍床层体积. 该树脂吸附操作简单,易再生,不产生二次污染,有望用于含铅废水的治理及铅的富集.

关 键 词:铅离子  大孔螯合树脂  吸附  解吸  机理  
收稿时间:2007-11-29
修稿时间:2008-01-22

Adsorption Behavior and Mechanism of Pb2+ on Macroporous Chelating Resin
WANG Fei,WANG Lian-jun,LI Jian-sheng,SUN Xiu-yun,FAN Chen-xi. Adsorption Behavior and Mechanism of Pb2+ on Macroporous Chelating Resin[J]. Chinese Journal of Process Engineering, 2008, 8(3): 466-471
Authors:WANG Fei  WANG Lian-jun  LI Jian-sheng  SUN Xiu-yun  FAN Chen-xi
Affiliation:School of Chemical Engineering,Nanjing University of Science and TechnologyThe Department of Environment Science and Technology of Nanjing University of Science and TechnologySchool of Chemical Engineering,Nanjing University of Science and TechnologyThe Department of Environment Science and Technology of Nanjing University of Science and TechnologyThe Department of Environment Science and Technology of Nanjing University of Science and Technology
Abstract:With the static and dynamic experiments, the adsorption behavior of Pb2+ on D418 resin was studied, and the adsorption process analyzed from the aspects of thermodynamics and kinetics, and the adsorption mechanism analyzed by infrared spectroscopy. The experimental results showed that in the studied condition range, the equilibrium adsorption data fitted to both Langmuir and Freundlich isotherms. The adsorption of Pb2+ on the resin was an endothermic process. Kinetic analysis showed that the adsorption rate was mainly governed by liquid film diffusion, with the increment of initial solution concentration, the adsorption rate would decrease. The static saturated adsorption capacity was 375 mg/g (based on resin) at 313 K, and the desorption rate could reach 97% by 3 mol/L nitric acid at 298 K. The optimal quantity of regenerant was five bed volumes. The resin can be used in wastewater treatment and enrichment of lead.
Keywords:lead ion  macroporous chelating resin  adsorption  desorption  mechanism  
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《过程工程学报》浏览原始摘要信息
点击此处可从《过程工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号