| THS6350卧式加工中心转台与托板定位与夹紧分析研究 |
| |
| 引用本文： | 刘文亮,谌永祥,李双跃,武颖辉. THS6350卧式加工中心转台与托板定位与夹紧分析研究[J]. 机床与液压, 2011, 39(14). DOI: 10.3969/j.issn.1001-3881.2011.14.002 |
| |
| 作者姓名： | 刘文亮 谌永祥 李双跃 武颖辉 |
| |
| 作者单位： | 西南科技大学制造学院,四川绵阳,621010 |
| |
| 摘 要： | 在配备交换工作台的加工中心中,定位与夹紧机构是一个重要部分,其影响机床的精度和可靠性.讨论THS6350卧式加工中心转台和托板的定位和夹紧机构,着重说明该机构的结构、工作原理,并分析其在夹紧状态下的受力情况和定位精度、重复定位精度的控制,从而保证机床的精度.
|
| 关 键 词： | 加工中心 转台 托板 定位与夹紧 |
Analysis and Research on Positioning and Clamping of Turntable and Pallet of THS6350 Horizontal Machining Center |
| |
| LIU Wenliang,CHEN Yongxiang,LIShuangyue,WU Yinghui. Analysis and Research on Positioning and Clamping of Turntable and Pallet of THS6350 Horizontal Machining Center[J]. Machine Tool & Hydraulics, 2011, 39(14). DOI: 10.3969/j.issn.1001-3881.2011.14.002 |
| |
| Authors: | LIU Wenliang CHEN Yongxiang LIShuangyue WU Yinghui |
| |
| Affiliation: | LIU Wenliang,CHEN Yongxiang,LI Shuangyue,WU Yinghui (College of Manufacturing Science and Engineering,Southwest University of Science and Technology,Mianyang Sichuan 621010,China) |
| |
| Abstract: | In the machining center equipped with changeable worktable,the positioning and clamping mechanism is an important part of the body.The accuracy and reliability of machine tools are affected by it.The positioning and clamping mechanism of turntable and pallet of THS6350 horizontal machining center was discussed.Its structure and working principle were described with highlight.Under the state of clamping,force,control of positioning accuracy and repeatable accuracy were analyzed so as to ensure the accuracy o... |
| |
| Keywords: | Machining center Turntable Pallet Positioning and clamping |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
