| 功能梯度材料制备过程影响因素的数值研究 |
| |
| 引用本文： | 方海生,陈义良,杜卓林,章明宇,黄庆. 功能梯度材料制备过程影响因素的数值研究[J]. 材料科学与工程学报, 2003, 21(4): 469-474 |
| |
| 作者姓名： | 方海生 陈义良 杜卓林 章明宇 黄庆 |
| |
| 作者单位： | 中国科学技术大学热科学与能源工程系,安徽,合肥,230027 |
| |
| 基金项目： | 国家自然科学基金，59976042， |
| |
| 摘 要： | 本文用数值计算的方法对重力浇铸下Al—Si／SiC颗粒系统(合金基质的功能梯度材料)凝固过程进行了研究，分析了凝固条件及各种不同参数对铸件中颗粒和溶质浓度分布的影响。结果表明，凝固件中颗粒体积分数分布都大致可分为三个区域：靠近底部的颗粒堆积区，靠近顶部的颗粒体积分数减小或近似为零区，及中部附近颗粒体积分数近似保持不变区。浇铸的初始温度，颗粒初始体积分数，颗粒直径和冷却速率等参数对颗粒和溶质浓度分布有很大影响。
|
| 关 键 词： | 功能梯度材料 制备 影响因素 数值计算 Al—Si／SiC颗粒系统 凝固 金属基质 |
| 文章编号： | 1004-793X(2003)04-0469-06 |
| 修稿时间： | 2002-12-04 |
Numerical Study on Influencing Factors of Functionally Graded Material during Casting |
| |
| FANG Hai-sheng,CHEN Yi-liang,DU Zhuo-lin,ZHANG Ming-yu,HUANG Qing. Numerical Study on Influencing Factors of Functionally Graded Material during Casting[J]. Journal of Materials Science and Engineering, 2003, 21(4): 469-474 |
| |
| Authors: | FANG Hai-sheng CHEN Yi-liang DU Zhuo-lin ZHANG Ming-yu HUANG Qing |
| |
| Abstract: | A numerical investigation of Al|Si/SiC particles system(functionally graded material based on alloy metal) solidification process is conducted.The effects of various processing parameters on the distributing of particle volume fraction and solute concentration were explored.It is found that there exit three different zones in the solidification cast:The denuded region on the top where the particle volume fraction is nearly zero,particle parcked region on the bottom and particle nearly invariable region at the middle part.Initial temperature,particle initial volume fraction,particle diameter and solidification velocity have great effects on the distributing of particle volume fraction and solute concentration. |
| |
| Keywords: | functionally graded material solidification casting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
