| 基于Pro／E的渐开线圆柱齿轮三维参数化建模技术 |
| |
| 引用本文： | 郑凤菊,张华,易勇,刘颖. 基于Pro／E的渐开线圆柱齿轮三维参数化建模技术[J]. 机械工程师, 2009, 0(2): 97-99 |
| |
| 作者姓名： | 郑凤菊 张华 易勇 刘颖 |
| |
| 作者单位： | 安徽科技学院,工学院,安徽,凤阳,233100 |
| |
| 基金项目： | 安徽科技学院稳定人才项目 |
| |
| 摘 要： | 参数化建模是Pro／E的重要特点之一。在建模的过程中创建用户参数、参数与尺寸的关系式，即可以通过修改参数生成新的零件模型，避免复杂的尺寸计算和重新建模的过程，大大的提高设计效率。文中介绍了渐开线圆柱齿轮的参数化建模过程。
|
| 关 键 词： | Pro/E 渐开线圆柱齿轮 参数化 |
The 3D Parametric Modeling of Volute Cylindrical Gear Based on Pro/E |
| |
| ZHENG Feng-ju,ZHANG Hua,YI Yong,LIU Ying. The 3D Parametric Modeling of Volute Cylindrical Gear Based on Pro/E[J]. Mechanical Engineer, 2009, 0(2): 97-99 |
| |
| Authors: | ZHENG Feng-ju ZHANG Hua YI Yong LIU Ying |
| |
| Affiliation: | College of Technology;Anhui University of Science and Technology;Fengyang 233100;China |
| |
| Abstract: | Parametric modeling is an important characteristics of Pro/E. If user-defined parameters and relations of parameter and dimension was created in modeling process, a new part can be formed when the parameters were changed. It avoids calculating complex dimensions and re-modeling using this method. At the same time the design efficiency was raised. Modeling process of volute cylindrical gear was introduced. |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
