| 柱塞式计量缸在燃油涡轮流量计校准中的应用 |
| |
| 引用本文： | 曹启威,王彬.柱塞式计量缸在燃油涡轮流量计校准中的应用[J].计量学报,2016(Z1):170-174. |
| |
| 作者姓名： | 曹启威 王彬 |
| |
| 作者单位： | 南京航空航天大学能源与动力学院,江苏省航空动力系统重点实验室,江苏南京210016 |
| |
| 基金项目： | 国家自然科学基金(51575257) |
| |
| 摘 要： | 研究了双柱塞计量缸的流量计校准装置,通过系统控制与计算实现计量缸计量流量与被校流量计测量流量的在线对比,以满足宽量程和高精度的校准要求.分析了该装置的结构特点和设计方法,通过仿真分析对其性能进行初步评估.研究了校准计量柱塞行程和移动速度对涡轮流量计仪表系数的影响,给出了建议的校准实验条件.结果表明,采用该校准装置可满足宽量程液体流量计校准,流量计量稳定性在0.2‰内.
|
| 关 键 词： | 计量学 校准装置 双柱塞式计量缸 流量计 仪表系数 |
Application of Plunger Typed Metering Cylinder to the Calibration of Fuel Turbine Flowmeter |
| |
| Abstract: | The flowmeter calibration device with double-plunger metering cylinder is presented.Through the system control and calculation,the metering flow of the cylinder and the measured value of the meter can be compared online,for meeting the demand of wide range and accurate calibration.Structure and design method of the device are analyzed and its performance is initially evaluated by simulation.Stroke and moving velocity of the metering plunger are experimentally studied for their influence on the meter factor,which suggests the preferable testing condition.Results show that this device can serve wider range calibration and has 0.2‰ stability of flow metering at most. |
| |
| Keywords: | metrology calibration device double-plunger metering cylinder flow meter meter factor |
| 本文献已被 万方数据 等数据库收录！ |
|
