| 钛合金与不锈钢的超声波扩散焊接 |
| |
| 引用本文： | 张秋峰.钛合金与不锈钢的超声波扩散焊接[J].机械工程与自动化,2008(1):125-127. |
| |
| 作者姓名： | 张秋峰 |
| |
| 作者单位： | 南京航空航天大学,机电学院,江苏南京,210016 |
| |
| 摘 要： | 研究了1Cr18Ni9Ti与TC4异种金属的固态扩散焊接工艺,在现有的工艺方法上采用超声波加载固态扩散焊接的工艺,并对比超声波加载扩散焊接工艺与传统扩散焊接工艺.金相分析结果表明:采用超声波加载扩散焊接工艺,使不锈钢与钛合金实现了良好的连接.
|
| 关 键 词： | 1Cr18Ni9Ti TC4 超声波加载 扩散焊接 钛合金 不锈钢 超声波 扩散焊接 Austenitic Stainless Steel Diffusion Bonding 连接 金实 结果 金相分析 工艺方法 固态扩散 加载 焊接工艺 异种金属 研究 |
| 文章编号： | 1672-6413（2008）01-0125-03 |
| 收稿时间： | 2007-05-09 |
| 修稿时间： | 2007-09-01 |
Ultrasonic Diffusion Bonding of 1Cr18Ni9Ti Austenitic Stainless Steel and TC4 |
| |
| ZHANG Qiu-feng.Ultrasonic Diffusion Bonding of 1Cr18Ni9Ti Austenitic Stainless Steel and TC4[J].Mechanical Engineering & Automation,2008(1):125-127. |
| |
| Authors: | ZHANG Qiu-feng |
| |
| Abstract: | The ultrasonic solid-state diffusion bonding of 1Cr18Ni9Ti austenitic stainless steel and TC4 was investigated. The diffusion-bonded couples were evaluated by optical microscope. Comparing the ultrasonic solid-state diffusion bonding process to the solid-state diffusion process at certain temperature and pressure,it appears that 1Cr18Ni9Ti and TC4 were bonded well through the ultrasonic pressing solid-state diffusion bonding process. |
| |
| Keywords: | 1Cr18Ni9Ti TC4 ultrasonic pressing diffusion bonding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
