首页 | 本学科首页   官方微博 | 高级检索  
     

改性条件对聚氨酯硬质泡沫冲击性能影响研究
引用本文:周晓谦;郑国阔;杜娟;鲁云婷;黄欣.改性条件对聚氨酯硬质泡沫冲击性能影响研究[J].中国塑料,2011,25(8):66-68.
作者姓名:周晓谦;郑国阔;杜娟;鲁云婷;黄欣
作者单位:辽宁工程技术大学
摘    要:将纳米二氧化硅(SiO2)和玄武岩纤维与聚氨酯复合制备了聚氨酯硬质泡沫材料,研究了异氰酸酯指数,水、纳米SiO2和玄武岩纤维的添加量及玄武岩纤维的长度等因素对其冲击性能的影响。结果表明,当异氰酸酯指数为1.05、纳米SiO2的添加量为3.0 %、5.0 mm玄武岩纤维的添加量为3.0 %时,材料的冲击强度达到最佳值。

关 键 词:硬质泡沫  改性  聚氨酯  冲击性能  纳米二氧化硅  玄武岩纤维
收稿时间:2011-5-10

Influence of Modified Conditions on Impact Property of Polyurethane Rigid Foam
ZHOU Xiaoqian,ZHENG Guokuo,DU Juan,LU Yunting,HUANG Xin.Influence of Modified Conditions on Impact Property of Polyurethane Rigid Foam[J].China Plastics,2011,25(8):66-68.
Authors:ZHOU Xiaoqian  ZHENG Guokuo  DU Juan  LU Yunting  HUANG Xin
Affiliation:ZHOU Xiaoqian,ZHENG Guokuo,DU Juan,LU Yunting,HUANG Xin(Institute of Material Science and Engineering,Liaoning Technical University,Fuxin 123000,China)
Abstract:Polyurethane rigid foam was prepared by introducing nano-SiO2 and basalt fiber into polyurethane matrix.The effects of isocyanate index,contents of water,nano-SiO2 and basalt fiber,length of basalt fiber on the impact property were studied.When the isocyanate index was 1.05,content of nano-SiO2 was 3.0 %,and content of 5.0 mm basalt fiber was 3.0 %,the best value of impact strength was obtained.
Keywords:polyurethane  rigid foam  impact property  nano-silica  basalt fibre  modification  
本文献已被 CNKI 等数据库收录!
点击此处可从《中国塑料》浏览原始摘要信息
点击此处可从《中国塑料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号