| 锑掺杂二氧化锡纳米导电浆料的制备与防静电应用 |
| |
| 引用本文： | 许国栋,张小燕,刘金库,孙凌,张建荣.锑掺杂二氧化锡纳米导电浆料的制备与防静电应用[J].上海涂料,2014(1):13-17. |
| |
| 作者姓名： | 许国栋 张小燕 刘金库 孙凌 张建荣 |
| |
| 作者单位： | [1]华东理工大学化学与分子工程学院,上海200237 [2]上海涂料有限公司技术中心,上海200062 |
| |
| 摘 要： | 以锑掺杂二氧化锡(ATO)纳米导电粉体为研究对象,以直径0.2 mm的氧化锆球作为研磨介质,采用卧式砂磨机对粉体进行湿法球磨,并添加分散剂促进纳米浆料的分散稳定化。通过优化试验获得了小尺寸、高稳定性、高固含量的锑掺杂二氧化锡纳米导电浆料。将该浆料加到环氧树脂中,添加量为1.5%时,涂层的电阻率为106Ω·cm,可见光透过率为87%。
|
| 关 键 词： | 锑掺杂二氧化锡纳米导电粉体 环氧地坪 防静电 |
Preparation of Antimony Doped Tin Oxide Conductive Nanoslurry and Its Antistatic Application |
| |
| Xu Guodong,Zhang Xiaoyan,Liu Jinku,Sun Ling,Zhang Jianrong.Preparation of Antimony Doped Tin Oxide Conductive Nanoslurry and Its Antistatic Application[J].Shanghai Coatings,2014(1):13-17. |
| |
| Authors: | Xu Guodong Zhang Xiaoyan Liu Jinku Sun Ling Zhang Jianrong |
| |
| Affiliation: | 1.Key Laboratory for Advanced Materials of Ministry of Education, East China University of Science and Technology, Shanghai, 200237, China; 2.Shanghai Coatings Co., Ltd., Technical Center, Shanghai, 200062, China ) |
| |
| Abstract: | The ATO nanoparticles were dispersed by wet grinding equipment. The grinding media was zirconia with the size of 0.2 ram. Dispersant agents were added to improve the dispersibility. ATO conductive nanoslurry with small particle size, high stability and high solid content was obtained by optimized experiment. The resistivity of the epoxy coating was 10^6Ω·cm and the visible light transmission was 87% when 1.5% amount of ATO conductive nanoslurry was added to the epoxy resin. |
| |
| Keywords: | antimony doped tin oxide conductive nanoparticle epoxy floor antistatic |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
