三维机织复合材料单胞模型各向异性的有限元分析 |
| |
引用本文: | 冯古雨,曹海建,周红涛,卢雪峰,钱坤. 三维机织复合材料单胞模型各向异性的有限元分析[J]. 玻璃钢/复合材料, 2017, 0(8). DOI: 10.3969/j.issn.1003-0999.2017.08.009 |
| |
作者姓名: | 冯古雨 曹海建 周红涛 卢雪峰 钱坤 |
| |
作者单位: | 1. 江南大学纺织服装学院生态纺织教育部重点实验室,无锡,214122;2. 江南大学纺织服装学院生态纺织教育部重点实验室,无锡 214122;南通大学纺织服装学院,南通 226019;3. 江南大学纺织服装学院生态纺织教育部重点实验室,无锡 214122;盐城工业职业技术学院,盐城 224005 |
| |
基金项目: | “十三五”国家重点研发计划项目,江苏省自然科学基金·青年基金项目,江苏省产学研前瞻性联合研究项目,中央高校基本科研业务费专项资金,江苏高校优势学科建设工程资助项目 |
| |
摘 要: | 使用三维绘图软件Pro/E绘制出三维浅交弯联机织复合材料数字化结构模型,借助大型有限元分析软件ANSYS模拟单胞模型承受不同方向压缩载荷作用下的力学性能。探究在不同方向的压缩载荷作用下复合材料单胞模型的应力分布情况,并借此分析复合材料单胞模型的各向性能;以承受X方向压缩载荷的单胞模型为例,分析复合材料中纤维与树脂的受力情况。结果表明:三维机织复合材料受到压缩载荷时,表现出明显的各向异性,表现为X方向压缩性能最好,Z方向压缩性能最差;纤维作为主要承载体,承担较多载荷作用,树脂作为次要承载体,承担较少载荷作用。
|
关 键 词: | 有限元 三维机织复合材料 单胞模型 压缩性能 各向异性 |
FINITE ELEMENT ANALYSIS ON ANISOTROPY OF 3D COMPOSITE UNIT-CELL MODEL |
| |
Abstract: | 3D composite unit-cell model was created by PRO/E 5.0 mapping software.Compressive property of unit-cell model under multipronged compressive loading were simulated with the help of the finite element software ANSYS.The stress distribution of the unit-cell model was investigated and analyzed.Meanwhile,taking the unit-cell model subjected to compressive loading in X direction for example,the stress distribution of fibers and resin matrix was analyzed.The results showed that 3D composite was obviously anisotropic under compressive loading,manifesting as the best compressive property in X direction and the worst compressive property in Z direction.Fibers made the major contribution to subject the compressive loading,while the resin matrix made the minor contribution to subject the compressive loading. |
| |
Keywords: | finite element 3D woven composite unit-cell model compressive property anisotropy |
本文献已被 CNKI 万方数据 等数据库收录! |
|