| 汽车端子多工位级进模设计 |
| |
| 引用本文： | 邹栋林,葛俊峰,缪霞.汽车端子多工位级进模设计[J].模具工业,2009,35(10):15-19. |
| |
| 作者姓名： | 邹栋林 葛俊峰 缪霞 |
| |
| 作者单位： | 1. 南通农业职业技术学院,江苏南通,226007
2. 南通友星机电工业有限公司,江苏南通,226007 |
| |
| 摘 要： | 分析了汽车端子零件的冲压工艺,介绍了排样设计、模具结构特点及关键零件设计。着重介绍了汽车端子零件与配套插头及塑料护套接触部位的舌部和方框的成形方法,同时,采取相应的成形结构,既保证了零件顺利成形又使其本身结构简单便于加工,并可根据试模情况及时更改成形部位尺寸。模具现已投入生产,零件质量符合图纸要求,对同类零件的模具设计有一定的借鉴作用。
|
| 关 键 词： | 级进模 汽车端子 排样 方框成形 |
Design of multi-position progressive die for automobile terminal |
| |
| ZOU Dong-lin,GE Jun-feng,MIAO Xia.Design of multi-position progressive die for automobile terminal[J].Die & Mould Industry,2009,35(10):15-19. |
| |
| Authors: | ZOU Dong-lin GE Jun-feng MIAO Xia |
| |
| Abstract: | The stamping process of a progressive die for an automobile terminal was analyzed.The layout design,the structure characteristic of the die and design of the key die parts were presented,especially the shaping method of the terminal and matching plug,the flap and rectangular part in the contact region of plastic sheath.The die structure is easy for manufacturing and the modification of forming dimensions. |
| |
| Keywords: | progressive die automobile terminal blank layout forming of rectangular part |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
